• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. O

    Torsion bar adjuster removal (cross threaded)

    Do you have a pictures?
  3. O

    Air grabber air cleaner ID

    At first glance it looks like a 1969 Ramcharger
  4. O

    Dieseling, surging - is it time to dump this carb?

    It sounds like when the secondaries are closing they're dragging on the bore walls.
  5. O

    Carter AvS 4737S manifold gasket

    This carburetor heat insulator gasket is original for a 1970 U code car
  6. O

    the NASA thread and anything related

  8. O

    the NASA thread and anything related

  9. O

    Pics from Back in the Day

  10. O

    Idle rpm drops substantially when putting car in gear

    Did you diagnose the cruise control for a vacuum leak?
  11. O

    Idle rpm drops substantially when putting car in gear

    I looked at the other pictures it does look it has the original 4640S carburetor the early version is kind of unique.
  12. O

    Idle rpm drops substantially when putting car in gear

    I agree with post number 7 and do the brake booster or cruise control first. It looks like it has a 1968 carburetor.
  14. O

    the NASA thread and anything related

    Endeavour docking at the International Space Station
  15. O

    Hemi AFB accelerator pump issue - initial bog on opening throttle

    If you plug the vacuum advance port at the carb and set the base timing to 21 degrees ....... it will work.
  16. O

    Power steering pulley size

    That pump looks like it has the smaller pulley. I have seen pumps like that one on 1968 cars.
  17. O

    Shifter issues

    It would be better to use 3 lock nuts that will hold the levers in place.
  18. O

    Rocker shaft shims…

    The end rails look like they are for a B engine. End rails for a RB engine are longer and will help to prevent oil leaks.
  20. O

    Rocker shaft shims…

    Did you put some RTV silicone on all 4 corners of the valley pan?
  21. O

    Valve cover gaskets

    Yes I agree, doing a cylinder head retorque is not a bad idea either ......
  22. O

    Hurst Shifter ****

    Linda 1969
  23. O

    Compression Test Results

    Have you ever done a cylinder head retorque after installing the engine?
  24. O

    906 heads, aluminium heads, 452 heads

    Looking at the first picture you put up it looks your right hand is resting on the fuel line. In the second picture it looks like the fuel line (hose) is getting a little wavey from the heat. In the last picture it looks like the fuel line is resting on the piece of metal which is also...
Back
Top