• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. O

    1969 4640S Carter AVS Question??

    While the carburetor is off, I would check the intake manifold bolts to see if there snug.
  3. O

    Plug reading

    Yes possibly pre-ignition or detonation. Could be caused by uneven fuel distribution.
  4. O

    Plug reading

    What temperature is the engine running at when it's percolating fuel?
  5. O

    Torsion bar adjuster removal (cross threaded)

    Do you have a pictures?
  6. O

    Air grabber air cleaner ID

    At first glance it looks like a 1969 Ramcharger
  8. O

    Dieseling, surging - is it time to dump this carb?

    It sounds like when the secondaries are closing they're dragging on the bore walls.
  9. O

    Carter AvS 4737S manifold gasket

    This carburetor heat insulator gasket is original for a 1970 U code car
  10. O

    the NASA thread and anything related

  11. O

    the NASA thread and anything related

  12. O

    Pics from Back in the Day

  14. O

    Idle rpm drops substantially when putting car in gear

    Did you diagnose the cruise control for a vacuum leak?
  15. O

    Idle rpm drops substantially when putting car in gear

    I looked at the other pictures it does look it has the original 4640S carburetor the early version is kind of unique.
  16. O

    Idle rpm drops substantially when putting car in gear

    I agree with post number 7 and do the brake booster or cruise control first. It looks like it has a 1968 carburetor.
  17. O

    the NASA thread and anything related

    Endeavour docking at the International Space Station
  18. O

    Hemi AFB accelerator pump issue - initial bog on opening throttle

    If you plug the vacuum advance port at the carb and set the base timing to 21 degrees ....... it will work.
  20. O

    Power steering pulley size

    That pump looks like it has the smaller pulley. I have seen pumps like that one on 1968 cars.
  21. O

    Shifter issues

    It would be better to use 3 lock nuts that will hold the levers in place.
  22. O

    Rocker shaft shims…

    The end rails look like they are for a B engine. End rails for a RB engine are longer and will help to prevent oil leaks.
  23. O

    Rocker shaft shims…

    Did you put some RTV silicone on all 4 corners of the valley pan?
  24. O

    Valve cover gaskets

    Yes I agree, doing a cylinder head retorque is not a bad idea either ......
Back
Top