Search results for query: *

Hello just wondering if the reproduction ignition wires are compatible with an electronic ignition as the web site says made to original specs but my charger came factory with a points distributor.Just wondering as I'm getting an unburnt fuel syndrome everything seems to running fine but after a...

What rim size and off set out back

yes done all that what i meant was where do you pull the radio out of which exit hole as it won't fit anywhere to remove it

Hello all just wondering if they know the sequence to removing a factory thumb wheel radio out of a 69 charger with a/c console shift as i cant's seem to wiggle it out of the dash don't matter which way i try thanks

I also have everything in the way power steering trans lines fan shroud sway bar etc.I normally undo the filter from the underside & sit it on the x member so i can reposition my hand then pull it through the x member gap and same thing in reverse when putting it back in full of oil it's all...

Nice car Repair the rear panel a good beater/painter should be able to blend it in !Do some work yourself clean up the engine bay & underside do the engine & box throw some second hand seats save yourself the nightmare of a restoration & money pit that way you'll be driving it need year

What wheel trims would work on a 15x8 magnum or road wheel has anyone done this before which wheel trims did you buy thanks guys

Hello guys has anyone used the vintique wheel trims 15"x 3" part# 3003-B-1 these are the stainless steel brushed finish as I've looked on line and all i can find is a generic picture which really doesn't show what they actually look like & how did they fit on a 10"rim ?. If someone has these on...

correct but as said when i put the electronic regulator it over chargers

I have an FBO ignition module which calls for an electronic regulator

i was thinking so but it doesn't seem burnt on the circuit board but then again maybe it cant be seen the damage that is

Hello guys upgraded my ignition from point to a electronic ignition so i decided since it's all electronic I'd upgrade the regulator but this is the strange part i start the car and the dash amp meter is off the scale so i put a multi meter on the battery and it's over charging up to 18v.So i...

Problem solved i had 2 lines at the front of the car mixed up swapped them around now all good thanks for the reply's guys

What a fantastic feeling filling her up after years of pushing the old girl around the workshop

R34 NISSAN SKYLINE

Hello all i have a bit of an issue i have a new 440 engine just been rebuilt i also have a 727 which is rebuilt and a 8 3/4 diff with a tru track just been rebuilt.Now my question is how do you run all 3 in as they all need different techniques to bed them in .The cam on the engine has been run...

We call them door trims in Australia now every knob calling them cards over here as well. We call the (Trunk) Boot & the (Hood) bonnet

Sorry guys but first i need to know the genuine numbers for my particular application & second i don't have that luxury of going to a vendor as i live in Australia & they don't have much reference on American cars hence the reason i need the part numbers & after market part numbers as there is...

Hello guys just wondering what the correct part numbers are for a 1969 charger 440 26" radiator with factory AC .I've looked up the part number in the parts book & came up with inlet 2863257 & outlet 2863245 or 246 as 2 listings for 440 not sure which one is correct & if anyone would know the...

It's a 1969 charger the vacuum hoses are all new & i think it's holding vacuum as the doors open & stay open as soon as i crank the car over .I'm guessing the switch but was hoping someone has had same issue as it saves a whole lot of work pulling out the switch.As it could also be the hoses are...