Search results for query: *

thank you

thanks Bob that's a definite on the clutch bearing i will change it 100% are rv2 &v2 clutch bearings the same or are these also different sizes ?

Thanks i knew that's what you said originally but the front clutch bearing got thrown into the mix somehow which fried my brain . i've done a web search & still unable to find any matching bearings for that 1994152 number even on the the link you provided, is there any other interchangeable...

yes i did see your post #2 i'm sorry but this is confusing me as i always thought a clutch bearing was on the front of the compressor with the field coil and pulley not on the rear of the crank shaft

okay thanks but not the bearing i'm inquiring about i'm looking for the bearing pictured in the compressor break down for the back of the crank shaft with the pink arrow pointing at it

I have my dad's original family car which is not a Mopar but a Holden Ht Monaro & a few years back someone one offered me 150k for it. The car is sentimental to me as it's my dads he's still alive me thinking it's his there is no way i could sell it so a few days later after being offered the...

I'm not seeing the rear bearing listed or am i missing it

Thanks all for the reply's i have new condenser& the under dash heater/ac box has been fully rebuilt with a new evaporator & the lines will be flushed.Bob just wondering were you would buy a carbon vs ceramic seal kit are you talking about the head gaskets & sump gaskets or the rubber shaft...

Thanks Bob yes i will replace all bearings and as much as i can find Nos with the exception of seals I've gone a little over the top I've got new old stock oil pump, pistons, crank, field coil and hopefully new bearings can you think of anything else please let me know because hopefully i only...

Hello sorry i corrected my question it's a v2 i have the front bearing which is correct which is part# 1854829 but thank you for the rear number .is there any other numbers such a from 68 or 1970 compressors that are the same.Also is why the v2 compressor bearings are not listed in the parts book ?

Hello all I'm slowly collecting the parts to rebuild my V2 A/C compressor but I'm a bit confused as to how many bearings are on the crank shaft according to my 69 parts book (illustration) it has 2 bearings both numbered 24-25-160 but when you look up that number it only shows one bearing number...

Nope we are still here in Australia but that's not far from the truth. I think this all is a side show for the future as most of the world has already been exterminated they just don't know it yet thanks to the covid jab we won't need as may cars now we have had a 600% increase in heart attacks...

Hello guys just finished up with my upper & lower control arms as in re bushing them & wondering what is needed while assembling them as far as greasing or lubing them up.Do the lower shafts need grease or lube and same with the camber bolts do they also need greasing and on what sections...

They still use drum brakes on semi trailers so can't be that bad

Thanks dadsbee you are correct to the part number at the rear, but i think it does matter front or rear because the torsion bar has been stressed in one direction for 50 years if you spin it around would it not now be stressed in the opposite direction ?

Hi all just cleaned up my torsion bars which came in a box like the rest of the car (basket case) and just wondering which end goes to the front and which goes to the rear the bars are marked L/H & R/H but not front and rear as i believe if you switch them around they will be clocking the wrong...

My original factory bars are marked left & right any idea which end goes to the front or rear as purple beeper said it would be twisting in the wrong direction if spun around the wrong way

amazing how things have changed 20k for 3 in today's market is a deal of the century

I thought the same that the backing plates were black but on close inspection they had no sign of paint on them & also due to feed back from other members i came to the conclusion they were a raw metal finish hence the silver metallic paint i tried to mimic raw steel . Thank you for your kind...

Thanks and yes it really is a snow ball affect but pretty happy with the out come