Search results for query: *

answered a post about the negatives of a split duration cam when the exhaust has a lot more duration than the intake duration.

Lucifer

My Coronet came with "A" body on it when I bought it. It doesn't need "A" new one.......... I don't play well with other idiots, to much in common with them and I don't need the competition. Clean up in aisle B.

That's a good "review". Short and to the point. So, I'm not missing anything again by not having pay TV I looked at the trailer and it shows a whip antenna in a quick shot. Anyone expecting accuracy and realism out of Hollywood is sure to be disappointed. Crank up the drama and cover the crap...

Thanks, I did a search but didn`t find what I needed, I`ll check out those threads.

Driving some nice roads this morning!

Sounds like you're well off enough to just use what Jay Leno uses.

Just a guess, to go with the prize storyline, Peter ?

It's not that I lose things, I put them in a special place so they don't get lost. It's that special place that I can't find. I have several of these special places, I guess.

The trivia question this month is pretty straight forward. Here it is... What is my middle name? Again, for those of you folks who may be joining us for the first time, you may find this key of symbols below helpful in understanding my responses to your answers. means I acknowledge your...

All but about 7-8 of them. The daytime slop operas were not watched by any of us kids.....

The paste did change the appearance of the pattern - looks better positioned on the drive side now. Looks pretty similar to the final pattern on my 8-3/4 gears I ran about a dozen patterns on a few years ago. I found there was a fairly narrow range over where both a decent drive pattern and a...

Up for grabs this month is this Greenlight 1971 Dodge Challenger

Oh boy, here we go again. https://www.forbbodiesonly.com/moparforum/search/42047417/?q=water+wetter&o=relevance

Here we go with another Monthly Mopar Giveaway contest for May of 2025

over40

.

The post above about making a reference mark is very good advice. After many years I still do that with a piece of chalk ect. Mark the base flange of the distributor and follow onto the engine . Also after moving the distributor remember to tighten the clamp before a test drive.

For anyone wanting to change settings. Check and write down where you are set right now. Check timing with hot engine choke open, same RPM, as RPM changes timing. Also put a vacuum gauge on the manifold vacuum port and watch that as you change timing and carb mixture srpcrews. Vacuum is...

Yeah, I think if you are going to cam up a street Hemi you need to add some deeper rear gearing to let it rev. I’m somewhat surprised how much stronger my 440 GTX feels off the line than my stock Hemi, both 3.55/3.54 gears. The 440 is an auto that helps with torque multiplication but still...