Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
74 Dart.
60s Chrysler.
A couple of Dusters.
Polara ?
Here comes that same Blue 73 Duster. It looks like they used it several times with ramps attached to the back side so cars "rear end" it near the corners and roll over.
This last one was from post # 70. I'll bet it is the...
A smaller alt pulley might help with THIS problem, but bring other problems. If the engine has been modified to rev higher, a smaller pulley means the alt spins higher, might exceed it's design limits.
If it does not cause a problem....leave it.
...the dist looks be in excellent condition. Weights need some lube; springs should be tight, not loose.
With the engine idling, retard the engine 5* & test drive to see if chatter is still there. I maybe wrong [ was wrong in 1974.....& 1981....] that Poly's could suffer from cracked...
Hey guys, I have 906 cast iron heads and the old cork valve cover gaskets were getting pretty ratty so I thought I’d try the Moroso blue rubber gaskets…they leaked like crazy on both sides and I attributed that to the imperfections of the cast iron mating surface. So I’m back to a new set of...