Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I lost my dad when I was 13, I’m now 67. I sometimes think back to what might have been. What different direction my life would have taken. I have some good memories and some not so good memories. But I wouldn’t change my life now for anything. I am very thankful for my girl friend, daughter and...
No hole in the back is a cast crank. Take it apart. Get a steel crank and check the depth of the hole in the back of the crank and have everything balanced. U can use a pilot bearing from a 90s up truck. Kim
Depending on where your block deck height is at u will more than likely have to use a thicker head gasket .051 compressed because those pistons will be sticking out of the block approximately.015 give or take a few thou. Or mill the top of the pistons down to sit flush with the top of the block. Kim