Search results for query: *

Does anyone know of any companies where I could buy a 16 inch Magnum 500? I would prefer a Mopar wheel, but if its a Magnum 500 for one of the other brands that would still fit my 70 Charger, I would still be interested. I know the 15 is more typical and 17s are available, but a 16 would be...

If its a mechanical set up, does that mean the two outer carbs are kicked in by the throttle linkage and not vacuum? Is there an advantage to that?

Is Hughes Engines experienced with Mopars and do you happen to have a phone number for them? Thanks! - - - Updated - - - Has anyone tried WesTech Auto in Silver Lake, WI? - - - Updated - - - I found Hughes on the Web. Thanks for the lead!

Thanks for the feedback. I'm just looking to rebuild it as a street engine and maybe occasional run down the strip. Something that is driveable, but yet better than stock.

I live in the midwest (Iowa) and am looking for an experienced good Mopar engine builder. Any recommendations? I have a 440/6-pack that I would like to freshen up.

I had a similar problem on my 70 Charger. It would just shut down, but would usually start again. After some digging around, I found that the orange electronic ignition box wasn't grounded very well. After I fixed the ground, it didn't seem to do it anymore. Also, sometimes replacing your...

I'm planning on pulling all my gauges out of my 70 Charger this Winter (speedo, tach, alt, temp, oil press) and sending them in to get re-faced and possibly calibrated. They all work good now (except the tic toc clock doesn't work), so I'm not sure that I'll do the re-calibration, but I...

I'm thinking about trying to change the motor mounts. I think that is why the engine is sitting so low and probably the source of the noise. Has anyone tried doing this before. Is it just the rubber isolator portion that needs replacing? Where is a good place to order new ones....Yearone?

Great feedback, I really appreciate the ideas. I'll try to see if I can get the noise on a video and post it. The car has about 30,000 miles on the engine rebuild with about 60 psi. It just seems strange that I don't hear it at all until about 3,000 rpm and if I put a little more load on it, it...

I have a 440 6-pack with a cheap pair of headers and a 4 speed manual on my 70 Charger. I get a metal to metal type noise at about 3000 rpm (kind of a repeating tap tap tap). Its fine with no noise between 0 and 3000 rpm, but once I hit about 3000 rpm, I start to hear this metallic type noise...