• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Order by date
  1. triggerdog1

    FOR SALE 1969 b body rallye dash bezel set

    Here is a new 5 piece rallye dash bezel set.this set has a pebble grain finish.these bezels are all in show condition and do not appear to have ever been installed. That being said the radio bezel has 1 missing screw boss and glovebox bezel has 2 missing screw bosses $400 shipped Located in...
  2. John Folz

    1966 Charger Steering Column Rebuild

    After the bearing is installed you can slide the bearing and rubber cover down into the slot in the upper column housing. Then the retainer that holds the bearing and turn signal switch down can be fastened with the 3 Phillips screws The turn signal lever can be installed if wanted. One longer...
  3. PlymCrazy

    Back to school bash

  4. Richard Cranium

    Hoping for clear skies

  5. O

    Main wire harness through firewall near pedals

    Does anyone have a picture of the main wire harness as orientation for mounting through the firewall near the pedals. There are two large brackets one with fuses and the other without. Pretty sure they stack on each other but once again I did not take photos on removal. Here’s what I’ve got...
  6. triggerdog1

    FOR SALE 1970 74 challenger and cuda original horns

    Here is a set of original hi and lo note prestolite horns for e body cars. These horns have matching date codes of 379 and both work perfectly. Horns are in excellent condition $ 275 shipped Located in murphy nc Thanks
  7. theman440

    Rear differential & suspension refresh

    Housing ready for paint - Painted -
  8. John Folz

    1966 Charger Steering Column Rebuild

    ...The lower circlip, bearing and upper snap ring can now be installed as well as the bearing rubber cover To install I placed the bearing in the oven at 300*F for 20 minutes or so. When I went to install the bearing it went right into place with just a couple light taps with a small hammer
  9. RJS

    FOR SALE 1971-2 Plymouth Road Runner/GTX/Satellite AIR GRABBER HOOD

    I send my one buddy 6 figure car's all the time!!! After all I'm on a fixed income. haha
  10. triggerdog1

    FOR SALE 1968 roadrunner horn

    Here is a new 68 roadrunner horn and horn relay. $110 shipped Located in murphy nc Paypal family and friends or postal money order Thanks
  11. triggerdog1

    FOR SALE 1968 70 b body original hurst shifter and mounting plate

    Here is a hurst shifter and mounting plate that was removed from a 69 roadrunner $125 + $20 to ship Located in murphy nc Paypal family and friends or postal money order Thanks
  12. NoGM4me

    440 Engine ID Question?

    What identifies it as a C body car?
  13. John Folz

    1966 Charger Steering Column Rebuild

    This weekend I was able to assemble the column as far as I could. I have not decided what to do with the steering wheel yet so that and the horn button will remain off for now. During the week I sandblasted all of the metal parts. The column tube and housing sections were painted with a light...
  14. 70chall440

    '74 Charger SE Front Frame Rail, Fixable, or Replace?

    This is definitely a great option.
  15. 71 Runner

    71 Roadrunner Dashpad

    I know some here think it is a waste of money but for me the dash pad is one of the focal points of the restoration. I had mine restored at Just Dashes. They did an excellent job on it too. It was pretty trashed from the Vegas heat. They did a color match from the underside that’s never exposed...
  16. HD539

    Happy birthday HD539

    Thanks
  17. M

    WTB 11 x 2 1/2 brake shoes

    I would be interested in those….. How about 334 and 336….. P.M. me…. Craig…..
Back
Top