Search results for query: *

So - I can use the single pin even though it is wired for a 3 pin? Do you know where they make an adapter?

Ok thanks I appreciate it.

no worries- I will play with it

Ok Thanks -

Ok thanks!

Yes - basically that is the problem. I could try a smaller washer to shorten the distance it extends into the case.

Yes it is! Not to mention the shifter linkage is like game mousetrap. I got one from Napa, I’ll give it a try.

Thanks - it is the 3 wire. I think the trans was rebuilt, but that is what is in there.

That is something I thought of. Do you have a place to get one? I tried the dealer to no avail. Everyone I have looked at is made in china.

I have read much of the discussion regarding NSS. This is a 70 GTX with the 727 auto HD trans. The car would not start every time, however the reverse lights always worked (whether it started or not). I replaced all of the wiring right from the ignition switch down to the starter. This needed...

Does anyone have the details for the placement of 70 GTX body side stripes. I found the detail for the hood, but not the body side. Thanks

I can't seem to find one for sale on the internet.

Thanks!

Found this in the trunk of a 70 GTX I bought. Not sure what it is for. I think it is for a Mopar? Thanks.

Thanks, appreciate it

Great, thanks so much. One question, I see he has a jack stand under the assembly. I know that a vehicle with coil springs must be supported under the lower control arm. Does this assembly also need to be supported when the spindle is removed? Also when the lower ball joint is replaced?

This is my first B Body and obviously there are no front springs. I have done disc brake conversions on cars with coil springs. In that case, supporting the lower control arm was required. Does any one have a step by step, preferably with photos on the correct way to do this so I do not screw...

Will do!

I noticed that also. Actually if you look at the "font" of the F and the HP, they look the same. It looks to me like the "J" is out of place. One guess is that the engine was rebuilt / replaced when it was under warranty and they added that at that time.

I wonder if I can get a little assistance. This is on my 1970 GTX front engine pad, thanks