Search results for query: *

Walla Walla?!? I was down there last year. Small world indeed. And I have been to North Carolina. My wife has relatives up in Ashville. We went leaf peeping last time we were in town a few years ago. Beautyful area.

With the electric pump, did you have to install a return line???

Hey all, Sorry for the delay in following up with this. I have been out of town and this is my first weekend back and under the car. I just finished wrapping DEI Fireline around the fuel line. I also installed a vapor separator filter and was running the return line. Got almost all the way to...

Good point RJ... I will put her up on the lift and check lines. How many of you have added a tank return line?

That makes far more sense. :thumbsup: You guys are great. I have some work to do to get my baby on the road. It's been far too long under cover.

Will do. Though the one I installed is much longer than .322 or do you mean .322 clearance between the rod and pump? And how does one measure that???

Ah... that is NOT where I mounted it. It is on top of the OEM intake manifold. I will move it.

I thought electric pumps needed a return line to the tank?!? I think anti-vapor filters do to don't they?

Thanks dvw... it does have spark and wants to start. It does that giddy-up start... almost starts, but not quite, then almost but not quite. Give it a few and it starts. But once it is vapor-locked, it runs REALLY rough under load. If I let it cool down, it runs great... again.

Got it... excellent. I will order some today. Thanks.

Well, your right about the fuel. Today's ethanol fuels boil out and I did (mistakenly) fill the tank with an ethanol mix. AND yes, I can see it boiling in the clear filter. I burned out the ethanol, well, most of it anyway, and even with premium (non-ethanol) fuel, it still boils. We are not in...

HA... Well, it is 90 degrees today. But I get the same response at 70. DEI wrap? Where's your fuel filter mounted?

Hey all, 1966 Charger with a 440 - New Edelbrock 750 AV2 carb. New mechanical fuel pump. - Total rebuild including the transmission. In the garage, it starts and runs great. On the road, until it heats up, it runs great. Run a mile and stop for a bit and it is obviously vapor-locking. The...

Ok... so the defection bar is a bimetal bar the moves based on the amount of heat. That is regulated by the fuel gauge in the cluster below the alternator gauge. It has an extra deflector with contacts. This gauge drops the voltage to 5v max. That gauge often fails to regulate the voltage after...

Pnora, the FSM i have DOES show the backup switch but does not show the dashed line for the bypass for automatic trans. If you have a scan of that, I would like to see how it is supposed to be annotated.

Hey 66JS... here's what I used. I think i paid something like $30 for it. Even so, it does not take much energy and took some time to perfect a weld. The wire is so hair-thin that the weld sometimes did hold very well. So to ensure it didn't come apart with use, I also put a bit of conductive...

:rofl:

Sorry... that should have been B2F, not B1F.

Hey all, for what it's worth, I used Visio and re-crafted the 1966 Charger wiring diagrams by tracing and redrawing the map... but with color and gauge-by-line-thickness lines. After rebuilding all 3 of my Charger wire harnesses, my backup lights would not work. Troubleshooting, I found a...

BTW... there are no dumb questions here. Everyone, and I mean EVERYONE, started with a lack of knowledge and experience, and had to grow into their skin. Never be afraid to ask.