Search results for query: *

Hi all. I'm putting together my buddy's 1968 Dodge Charger R/T factory 440 car. Putting a new brake booster on it and I'm wondering which one it should have. I know it should be Bendix since it has factory 4 piston calipers, but I'm not sure which one. The shop manual is very vague. It shows one...

Hi all. I'm putting together my buddy's 1968 Dodge Charger R/T factory 440 car. Putting a new brake booster on it and I'm wondering which one it should have. I know it should be Bendix since it has factory 4 piston calipers, but I'm not sure which one. The shop manual is very vague. It shows one...

Why is the last few VIN #s on the fender tag blocked out?

Yep. And I think I finally figured it out. Thanks all!

Do yo Any chance you have either a 68 manual so I can give you circuit numbers to follow?

Appears the A/C compressor is being powered directly from the control and not through the time delay relay in defrost mode. Also seems like both power wires off of the control (not the fan speed switch) are getting power on all settings but heat. Seems like it would create a short.

Ok. Here is a weird one. I'm working on a 1968 Charger with A/C. I'm testing the controls and I think something is wrong. Seems like power is being sent where it shouldn't be. Does anyone know where power should be sent (i.e. to the compressor, and which part of the blower resistor) when each...

If anyone has some good used or NOS I'm interested

Unfortunately these aren't the clips I'm looking for. Its the ones that attatch the interior header panel for the headliner. Those are the exterior trim clips. And thanks for going off topic. lol

Yep. MEGA Parts sells the same ones. Exact same thing happened to me.

Yep need all 6

RT Specialties gets theirs from the same suppliers. I've checked with them already. And I just took a look at that ebay link, unfortunately I don't think they have it

Hi all! Putting together my buddy's 68 Charger R/T and am in search of some good windshield header clips that go at the top of the windshield that the panel screws into. I've gotten some from MEGA Parts but they are absolutely horrible. You go to pinch them open to secure them and the tabs snap...

Wondering if anyone has a working AM/FM thumbwheel radio for a 68 Charger they are willing to part with. Wondering if there is one out there that won't break the bank.

It's a 318. All stock

Hey all. Have a 1973 Satellite that I have to do the oil pan gasket on. Wondering if there is enough room to slip the pan out without lifting the engine. Has those bushing style motor mounts and it'll be a pain to have to try and space then engine up. Could do it on the older B body's with a 2x4...