Search results for query: *

Mike won't a pop rivet work or a bolt and nut if you can get at the back side. I have a good supply of old clips but not that one.

I think NAPA has some Bilistine shocks available. They might be those.

Factory ac cars, citron gold interior. I can't get under the car right now because of health reasons.

Trying to find out what this number is on a 383 engine in a 66 Satelitte. The only number on the pad below the distributor is A29577A no other marking either. I dont think it is the original engine because it has some orange paint too. I can't get under the car because of health issues. This...

Jegs has a Helwig bar listed for a 64 fury and 64 Dodge Polara. I think that is the bar I installed on a 64 Belvedere. I had to drill holes in K frame. Fit well.

I have a 66 satelitte 383 auto. I dont think the engine is original but it only has this number by distributor A29577A. Does anyone have info on this number. Best i could do for picture. .Thanks

I have used this switch kit and was easy to install on a 64 Fury. You can also just get a 4 way switch and make the rest.

Mopar had a 4 way flasher kit that could be used on many years of cars. I have installed them on a 64 Fury. Not a difficult install.

Welcome from Minnesota I like your Charger

I made my own version of a Little Red Express. 400 e.gine,4wd,extended cab. I had fun building it and had many comments on it. Had to sell it 12 years ago when we moved. Sort of miss it.

Do it. Your car an sport wagon is rare..

I do not use any adhesive at all. The kick panels and the screw hold downs under the door sills hold it well. I let it sit in the hot sun and use weights where needed.

I have had very good response fron ACC if the carpet does not fit right. I have always installed the carpet within a month or so. They have replaced the carpet if my pictures show the problem. And the replacement comes very quick.

I am having the same problem with my 66 satelitte. Right side only. I can't find any extra play on that side. Using mopar wheels fron a newer Cordoba and have had them on my 64 fury sw with no issues. I now I have a 1/4 inch spacer installed to make it work.

read the service manual about rebuilding the joint . The pin has to be centered with very little tolerance or you will have a vibration. I a press will work better. The rubber boot can be installed without taking the pin apart also.

Welcome. I just pick up a set for my 64 fury 318 poly. #63

I have Super Bright led and like them. I am using the led in the rear only on my 64 Fury. Super Bright has a resistor you can install in line and the original flasher will work. Make sure the led bulb has a very good ground for it to work proper. Super Bright has good customer service too.

I am using that regulator on my car and I am happy with it.

Welcome foorm Minnesota. Nice Belvedere. Enjoy the site.