Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am going through a move and may have to sell my baby. It started life as a 68 383 2bbl car, it has gone through a painstaking transformation as seen by my restoration thread. It has been completely stripped down and rebuild, added frame connectors, and other chassis stiffers. Drivetrain is a...
Are these dashes interchangable? And by that I mean can you swap the pads of a non AC dash onto an AC dash to coverup the ducts? and the end covers as well?
Thanks in Advance
Lower bowl wells are the culprit 90% of the time. I had a great running carb on a Swinger with a 360 run great all day until you let it sit for more than 5 min then it would not start without a prime. New O- rings and fixed it right up. :)
Looking for a screw that attaches the vacuum pot arms to the headlight door, I believe they are called Tribular screws I am short one of these and having a hard time finding a source for them.
Thanks
Jamie
The 68's have the provisions in the frames for them in my case I had a donor set of seats out of a C body and robed the plastic mounting inserts and chrome bezel and they screwed right into my seat frames.
Trying to put together a steering column for my 68 was auto now 4spd with ps. Building my column and struggling with getting it back together. Any YouTube videos or help? I am struggling with the square head bolts tighten them down to secure upper column housing to the tube.
thanks in advance...