Search results for query: *

i screwed up and didn't realized there was a difference and installed the short stem ones. guess i will try and redo the original ones. i have checked with about 6 places and havent found new ones for it. thank you

does anyone make new window regulators for a 1967 charger?

was the sheet metal springie enough to hold . the orignals are out of spring metal.

thank you, bruce

wtb fasteners for rear beltline / pinchweld moulding fasteners for '67 charger. only need the 2 front sawhorse shaped smaller ones for each side, but would but whole set if needed.

i see some of the previous posts but i understand these fasteners are not made anymore. i have a '67 charger and need the 2 smaller sawhorse shaped fasteners tham. has anyone used anything else to hold trim. in picture the left 1 is the regular size that i have. the right 1 is the smaller rusty...

maybe someone has 1 to take apart or to sell. i'll put a wtb on

thank you very much. sure appreciate you guys. bruce

i bought new letters for hood '67 charger a number of years ago. don't know how to put them on. there is a plastic sleeve on tips. does it stay on or not? if it stays on i will have to drill holes bigger. if it comes off do i fasten letters on with push nuts? no threads on points. thank you, bruce

yes, my set up is different. the switch is turned on when console door opens and the lite is mounted inside on the back. .

but i don't know how the switch works to make contact inside the blk plastic housing with the wire.

i am tring to repair button for console lite in '67 charger. the spring does not contact the positive wire in the plastic tubing. is there a piece missing. i can't find a diagrahm or replacement. any ideas? thank you, bruce .

Right bumper on top was damaged a little before I bought car.

i don't remember how these fit or attach. the stainless steel moulding under grill to crossframe and c-chrome around parking lite. did i do something wrong? pictures are from underneath and orange ear plug shows hole in crossmember. c- chrome is as tight as possible.

i recieved email from person saying they had bought from this person last year and he said he had good stuff. chrome trim was for sail panel area with a '67 charger vinyl top.

I posted for a chrome moulding for '67 charger. Response was $40 for moulding and shipping from Ken Trevor. Anyone know him or any thoughts? Bruce

I broke 1 sail panel trim on '67 charger. if I braze the break, can it be rechromed? or is there a better way to fix it? thank you, bruce

it's has been years since I remove trim and i don't remember how it goes on and of course i didn't take enough pictures. are there clips on pinch weld from door all the way to end of fender or is there other fasteners at the door end? from the door forward do use plastic clips and then bolts...

'67 charger with vinyl top, need v-shaped chrome trim for sail area. mccall, id. 83638

Thank you. When I painted steering wheel the center surface got heavy primer and color paint on side that contacts button. Scraped it off and sanded. Works now.