Search results for query: *

Oh yeah, One more thing... Had an annoying tick from when I first put the engine back in the car. Pulled valve covers when I went to race in Florida in March and didn't find anything. All header bolts were tight. Lying under the car over the weekend rewiring starter, I see carbon on front of the...

Update, back on the road, governor was missing internals and sealing rings, also I am now wanting to sale this reverse valve body if anybody is interested, thanks so much for everybody's help

I like it!

Probably... but not here at camp

Rear entry does not fit/work with 383/400/440 stock mounts. The rear entry was designed for the hemi. The side entry isn't the greatest but that's all that will work with a big block.

I don't know - they don't seem uncommon. With the odds so slim any of the items in this forum will be reunited with their original "stuff", you've probably got your builder. Once in a blue moon, there's a successful re-connection here - makes the trying all worthwhile to me.

Thanks for all the Birthday Wishes! 78 today.

The best way to measure bearing clearance is: with OD micrometer, measure crank journal and rod bearing journal diameter. To measure main bearing clearance, use snap gauge for the ID of the journal with bearing cap installed with bearing insert installed, torqued to specs. The bearing...

Depends on head flow too; with the same heads, the 383 will wind up higher before reaching the flow limit, as compared to a 440. Once the head is maxed out, that's all the power you'll get, no matter how many cubes.

North, 1970 Super Bee you say.....

When I had the gasket installed with fresh glass from AMD on my 68 Satellite, the shop that did it said they sometimes use a hair dryer heat gun at the final 2 corners to assist final fit. Anyone else use this in addition to the lubricant (linseed oil, detergent)? They also mentioned that some...

He used something like a mustard bottle similar to this: He just squirted it in and set the glass in the bottom. He went from the bottom UP like I have done.

FSM is factory service manual. Available at Mymopar. No timing chain tensioner.

Have a Great Day !!! :bday::drinks::bday::drinks::bday:

Well deserved congratulations. For every one thousand MLB contracts signed, only one player ever gets to play in the big leagues. A dream come true

do you have a photo of getting the seal over the top corners of the glass? Those are the tricky spots.

Have a gooder Dave!! :bday:

HBD!

Yepp, it measured 3.222"

Happy Birthday to You Sir & Many More! :bday: :drinks: :bday: :drinks: :bday: :drinks: :bday: :drinks: :bday: :drinks: :bday: :drinks: :bday: