Search results for query: *

Thank you. Much appreciated. I have the seal the wrong way around. The opening is pointing inwards. Not outwards as per the pic. about.

Hi BBodies. Can someone send me a picture of how the Trunk seal sits???? 1968 Dodge Coronet R/T 440. Have trouble with leaking water. Thanks. Pete

My Sniper install has been great. A few bumps along the road. Holley now produce a fuel pump attached to the sender unit. No new tanks etc. Wish this option was available 4 years ago. Don't over think. Have a look at this fuel pump. Easy install. Holley: 12-308 Good luck.

Hello from down under. The above worked for me also.

After my 440 rebuild I had the same oil pressures. I changed the pressure relief spring in the oil pump to a Hemi 426. Oil pressure @ idle approx 15-20. Pressure when cruising approx 50-60psi.

I have used Doc Diff's stuff and highly recommend. Cass knows his gear and will answer ALL your questions.

Hello from Melbourne down under. I had the exact same problem after replacing the steering box. Took me a few goes to finally position the valve on top of the box right as kiwigtx has shown. Good luck. Stay safe in these terrible times.

I had trouble with no oil pressure. I hadn't changed the oil pickup during a build because pickup looked clean. A BIG MISTAKE. There is a second layer of smaller mess (filter) behind the exterior larger mesh which you can't see. A new oil pick up fixed the no oil pressure. There was no...

Hi. My experience was to have broken down 3 hrs from home. I found the pushrod had worn approx 6mm. I replaced the pushrod and mechanical fuel pump. Still did not work. A lot of work to remove the cam and have the lobe repaired. Have now now bought a Tanks Inc fuel tank and fitted a Walbro...

Hi hunt2elk.I:icon_smile: totally agree with your assumption that the aftermarket tanks are incorrect. Do you know of an alternative generic fuel sender ?? Pete - - - Updated - - - Hi Seth. I live in the Northern suburbs of Melbourne. My Coronet is a Burgundy with black bumble bee strips on...

Hi Furyus. I found the proper earth strap from a dealer. Will buy ($22.00 AUS) and try that. Thxs. Pete

Thxs Budnicks. I have tried bending metal rod etc. My next job is to replaced resistor on the printed circuit. It may be faulty. Pete.

Thanks Eric. I have checked the gauge the way you explained. Gauge works fine. I have come to the conclusion I need to replace the sende unit even though it is only 2yrs old. Where can I buy a quality piece?? Regards,, Pete

:hello2: I'm new to B Bodies. I'm in Melbourne Australia. My Mopar is 1968 Dodge Coronet R/T 440 which I love. A question if I may. Having problems with my fuel gauge/sender unit. When tank is full gauge reads 1/4 - 1/2. I have removed tank from car and checked sender unit for OHMS resistance...

:angry9:Hi Ron. I'm new to B Bodies. I'm in Melbourne Australia. My Mopar is 1968 Dodge Coronet R/T 440 which I love. A question if I may. Having problems with my fuel gauge/sender unit. When tank is full gauge reads 1/4 - 1/2. I have removed tank from car and checked sender unit for OHMS...

HI. Is this car still for sale. Pete