Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I purchased a chinese distributor from RA went through it to lube and inspect then purchased one of these: Mopar HEI Conversion
It's been working fine for 6 years now. I went with a new distributor as it was cheaper than anything I could find used.
My battery is in the trunk, ground is through a nut welded to the roll bar floor plate which is also welded to the structure. I added a ground from the transmission extension housing to a 1/2" set screw that presses into the torsion bar cross member for circuit completion. 0 gauge cable.
The "dust" in the pan is very common-most likely from the torque converter. I believe there are some paper fragments on the old filter from the clutches. The filter is indeed for 62-65 Torqueflites. You should have the single hole model. The filter extension is puzzling, it has 3 holes? Weight...
Final update: Well, once again it was my fault. I swapped the 2 leads I had crossed earlier but, I really didn't. DUH! Now the wipers function fine. Human error.
I was so dreading pulling the wiper motor that it was affecting my diagnoses.
The wipers work with the switch in off position. At this point current is available at the red, blue, black, and pink wires at the switch connector. The yellow I believe is high speed. Turn switch on and they stop? Both units pass the FSM wiper motor and switch tests. All new wiring up to the...
I chose a 12,000 mini to just dehumidify the air. The shop rarely gets warmer than 72*. The conditioned space is about 35'x68'x10' or 23,800 cu ft. The North-South building is 144' long. The East-West building is 78' long now that I added a full width lean to on the East end (not shown). I...