Search results for query: *

I need the bolt/stud that hooks to the bracket in the trunk floor to hold the spare tire and jack base in place. Have no idea what I did with my original many years ago

I'm looking for a bumper jack for a 65. The hook is probably the most important piece as the other pieces crossover to A or C bodies (according to the part numbers anyway), but finding the whole works all together would be nice.

I'm looking for 10 original factory left hand thread 1/2" lug nuts. Would like to find a nice set with good threads and nice square corners, not rounded off

I'm looking for an alternator with a late 64 to early 65 dated case. Doesn't need to work but looking for a clean case that hasn't been sand blasted. Probably a long shot I'm sure

I'm looking for the outside door trim for right (passengers) side of a 65 Belvedere 2. It's the 2" wide piece with the painted center that runs the length of the car. Trying to find one that's straight and not all beat up to have restored

I need one of the clips that attaches to the side of a bench seat frame on a 64-67, it's the small clip the plastic hinge cover screws in to. Missing one of the upper ones, looks like the one pictured

I'm looking for a nice pair of the 64/65 rear arm rest pads in light blue. These are the 9" ones that fit the 10" base. With ashtray holes would be nice, but without holes in the right color is fine too. Trying to match color of the front pads in the picture

I'm looking for the early style speedometer pinion with 20 or 21 teeth for a cable shift trans.

I need a few of the clips that attach the wide trim that runs front to back on the sides of a 65 Belvedere 2. I can't find anything like these in the repro market unless I'm looking in the wrong places

I'm looking for a set of lower control arm bumpers, NOS or nice used. I know they are reproduced but I'm looking for the early style with the round top instead of the later pointed top style that they are making now. Bumpers on pictured arms are the style I'm looking for, credit to Jim V for the...

I'm looking for a set of new repro door sill plates for a 62-65 2 door. They seem to be out of stock everywhere I've checked, so if anyone has a set they bought and didn't use, I could really use them

I'm looking for a pair of Holley 3116 carbs that came on the 64 and 65 Race Hemis. Would prefer complete and restorable if possible

Looking for a set of NOS or nice used tie rod shields, same part used on A,B or C bodies from 62-67, part number 1858 262 and 1858 263. It's a big rubber boot that covers outer tie rod end.

I need the piece of interior trim that goes across the top of the windshield on a 64 or 65 B body, chrome or painted doesn't really matter as long as it's in good shape. Might also be interested in the upper corner pieces that the center piece attaches to.

Looking for a clean (not badly pitted) factory harmonic balancer/vibration damper for a big block with a forged crank. Style I need is usually on early big blocks, has solid front face not the indented style.

Looking for a clean (not rust pitted) set of leaf spring front hangers for a 65 B body. I believe 64 and 65 are the same. Let me know what you have

I'm looking for an oil pan for a 64/65 B body with a big block. Let me know what you have and how much. PM or email to: daytona92@comcast.net

I'm looking for a nice used reaction shaft support for a 727 trans from 1967-1970. I am hoping to avoid buying a whole trans just to rob this one part from it. PM or email to: daytona92@comcast.net