Search results for query: *

I have been thinking about getting a fuel injection setup for my 73 360 engine charger.I think I'll be getting a Holley kit if I get one. Have anyone installed one on their mopar and if so what do you think of it?

Need horn and buzzer relay for my 73 charger,can anyone tell me where I can find one?

can someone tell me the correct torque number for my 73 charger k member bolts, I will be thankful for the infro.

I have a 73 mopar 440 block that have never been bored, I had planed to build the block but I have since gone another way. I have the block and caps only. I also have a 400 block out of my 73 charger that have never been bored.I want to know just what I can get for these blocks when I try to...

I have a 73 charger that I believe need lower control arm bushens, How hard is it to do? I say this because I see the rubber around the out side of them broken.I have replaced every thing under the car but the lower control arm bushens, plus there is a popping sound under the car when leaving...

I have a 73 charger that have new body mounts,new balljoints, new trans mount and new spring bushens front and rear, the car makes a popping noise any time it is on unlevel roads or coming out of my tilted driveway. I have checked all bushen bolts and they are all tight.I have checked every...

I have a 73 charger with edelbrock heads on a bored 360 engine with a small cam headers and a air gap intake, I run champion plugs and have always since I bought the car 25years ago. I have noticed that the engine has always idled kind of ruff and I have never been able to correct it.the engine...

I replaced the gearbox on my 73 charger and the rebuilder said that a filter should be used to prevent anything harmful getting into the gearbox.what do you guys use and where do you get one if it is being used.I thought about a fuel filter.

What are some of the signs of a blow head gasket other than over heating or water in the oil? I have a 360 in my 73 charger and it seems to be reaching operating temperature faster than I can remember,it had a 160 thermostat in it and it was going to 190 on days with temperatures about 90...

I have a problem with my horn not working,I know the horns are good because I have straight wired them and they works. I thought that the horn relay was also the buzzer that sounds when you leave the key in the switch, I have tried to find this relay but can't find one, how do these horns work...

I have the same problem many early mopars have dim head lights at idle. I want to up grade the alternator to a higher amp so it will idle sitting at a stop light or sign. what is the safe amp to go to with a 73 dodge charger with stock wiring nothing pulling amps but a after market radio, brake...

About three months ago a friend called me and told me about a new friend he had gone to see and what he told me was unbelieveable he told me about a family of brothers and brother inlaws that had all kinds of mopars, he asked them if he could bring me to see them and they told him it was ok,they...

I have a 73 dodge charger that have a bad fuel gauge problem. I have replaced the sending unit twice hoping that I just got a bed sending unit but it goes deeper than that, the gauge goes all over the place full, empty, than half full the hold time I'm driving it,the unit is grounded so that is...

I have a 73 dodge charger and for years I have put up with dim head lights at night when I hit the brakes or sitting at a stop light at night,just driving the voltage is at 14.5 but use the brakes, wipers or heater and it falls to 12.5 what can I do to get this problem solved?I run a hot wire...

I had my TA checked today for a check engine light soon. I was told that they all was related to one problem.and that was a secondary air injection system fault, can anyone tell me just what these codes are refering to so I can repair it.

Where can I find a good cover for my cars that spend their time outside in the weather I need some that will hold up and protect the cars until I find a better way,I am trying to buy some land next to me but until then I want to protect them from the weather.

I have a 73 dodge charger with a 360 bored 30 over with flat tippet lifters.I know that the roller engines can and will do well just using any good engine oil but I have been told that the none rollers need a brand that have zinc in it, I have been using A engine oil that have the zinc still in...

I installed a alternator on my dodge charger and it is now over charging, it's putting out 16 volts. I took one back because it was doing the same thing, I was told by the rebuilder that the alternator had to be shorting out inside,this was after he ran me though a number of test to perform.now...

I believe I might have a bad axle bearing, what are the signs if it's bad? I hear a whirring sound and their is vibration .how do I go about checking before pulling them If I can? they are on my 73 charger.

Need to remove oil pan and replace front and rear main seals, also want to change the front timing cover seal , looked at it but could not tell if it went in from the front or rear.