Search results for query: *

Again, somehow I was able to get the hardware in and tight all by myself. Sometimes it is a matter of putting a box end wrench on a nut then using an air ratchet or the battery operated one from the other side…shock the bolt fast and the stuff can tighten up before it slips. Everything is...

What kit did you use? We may just sell the oem one and go with an aftermarket unit like you did.

My guess is '64 Fairlane.

I installed an aftermarket anti sway bar in my 65 Coronet. It came with brackets that attached to the lower shock bolts, but the OEM bolts were a little short. It did make a world of difference though. Mike

65 coronet. That’s the whole piece.

BOSS Audio Elite BE9ACP.XC https://www.crutchfield.com/p_104BE9XC/BOSS-Audio-Elite-BE9ACP-XC.html The screen is detachable and a touch screen. Crutchfield says "doesnt fit in your Plymouth" . Little do they know nothing on that car is supposed to fit my Plymouth.

I had a 1979 cvc 1000. 2 speed clutch less automatic. I restored it as a commuter car for the wife , until she crashed it on a snowy day.

Can someone identify this grille for me? I have two actually. Came from a Mopar Hoard so I'm pretty sure its Mopar. Thanks.

Let me get this straight, you are talking about an added parallel wire run (shunt wire) from the alternator output stud to the battery(or the battery terminal on the starter relay), with or without its own circuit protection(optional apparently), overlaying (shunting) the original intact (or...

We must have the early 66 because it does mount to the strut rods like you mentioned. I’ll get pics tomorrow.

Just get a set of Monroe. #32022 front & #32073 rear. Paint black as Jerry posted.

Changing master cylinders on a power brake car is relatively easy since the booster has studs in it to attach the master cylinder. When changing from manual to power brakes, there are mounting bolts and nuts that are on both sides of the firewall. If you don’t have a helper, you have to get...

Happy Anniversary

I use those binder clips for everything !

Happy anniversary

How much current do you believe will open one of these ammeters? If the battery is completely flat (discharged), how do you get it started?

I do not see the carburetor adapter in there and it comes with that Edelbrock intake manifold. Without the carb adapter you have a vacuum leak. You can spray in between the spacer and the intake manifold (near the secondaries) to confirm.

Lots of C bodies over there.....hope this isn't the one that was on the track this past week when the posi or axle broke....

Looks like 707-287-9970. Possibly 767. It drove by me more than once, not only does it look better in motion, watch out for those fins, they're bigger when swinging around and will get you.

and furthermore Why You Shouldn’t Respond to “Thank You” With “No Problem” There’s a common perception that by answering an expression of gratitude with “no problem,” you’re hinting that the effort exerted was or almost became an inconvenience. (Ditto “no worries,” “don’t mention it,” or “it...