Search results for query: borgeson

I grew tired of the high resistance of my Firm Feel Stage 3 with Fast Ratio arms. When I swapped in my Borgeson, it was a nice change. I had not heard of anyone that went back and shimmed their Saginaw once they installed a Borgeson. I've been under the impression that the Borgeson needs all the...

I have the borgenson unit installed. I was just wondering what to do with the original.

That won't be for a while. That kit is 1,400 bucks

Well, now that you've "triggered" MY ocd, I have to fight with myself to leave it alone! Thanks! (Sarcasticly speaking) lol

Where can I find a power steering pump with the pulley that fits my 67 Charger with a 383? I tried the Borgeson 800338 unit. It fit nice, without the spacers anyway, and I could finagle the hard line to work, but the return line on the pump they sent me will not fit between the fitting and the...

Try a Lares 11043. Check them out, I think Summit has the best price. Its 2.5 turns lock to lock.

UPDATE: Ehrenberg messaged me and said the borgeson isn't as effected by shims as the factory unit and that it shouldn't hurt anything to experiment with it. I removed the valve to take the shims out and I remembered I had a another backup pump on the shelf. Exact same part number. I took the...

Two things you can try. Switch to the Borgeson UJ. #036425 Mopar vibration reducing universal joint coupling. Try shimming the motor over to the passenger side a little. Motor Mount Shim Pack

Besides my own, I’ve recently been involved with another BAC/Borgeson conversion, both ‘72s and using the BAC coupler. In both cases a very loud annoying hydraulic noise transmitted up the column, starting after a few minutes of running time. BAC exchanged them both, and in both cases the second...

My experience as well. My belt is tighter than I'd normally like, but if it stops the belt squeal, I'll take the tradeoff

Yes, I bought mine directly, put it in with hybrid coupler etc....and have a small slop at center. Checked and the movement is in the box.

...B-body steering column have a lower bearing? Mine doesn't have one, and I haven't found any information about it online. I've installed the Borgeson steering box, and the angle from the shaft to the gearbox looks odd. The steering column, and therefore the shaft, are positioned via the column...

Hi, I just had a shop replace my original steering box with a Borgeson. Should I have them toss the old box or are these worth saving? Do these affect numbers matching? Thanks, Brad 69 GTX

Bergman's Borgeson swap kit doesn't require the steering shaft to be cut.

...car was in pieces when I got it, assembled it cranked the motor over and it was leaking from both seals, not a drip a steady flow, bought a Borgeson and put the T/A box and pitman on the shelf with my other high dollar stuff. Talked to the past owner and he stated he could send it back but I...

...units, not just a seal replaced and coat of black. If you want to step up your game, BAC, one of our sponsors, can hook you up with a Borgeson box and ALL of the needed pieces to put it in your car. Anything else is a waste of time. Parts store stuff is something to stay away from. Doesn't...

Cap, I answered your question in post #34. Look at pic #2, it shows the 1/4" washer I added to bring it in line. As I said, I quizzed Peter about this back in 2014 and thought they fixed the issue back then.

If it was I, Borgeson would be the choice. We installed the complete set up in a 64 Dodge station wagon. Drives great. Very impressed. I am saving to do the swap on my 63 Belvedere.

My only criticism of the kit is the directions.. in the small block kit it doesn't show where spacers do and they are pretty self explanatory except 1 washer... had to pull the whole pump back out to put in one washer... still not 100% happy with belt alignment but i'm sure it's my fault.