Search results for query: *

Went for some cruisin' today. Pounded her sometimes but 2 times, after flooring it, the engine stalled: 1. went to all four gears, hard. Approaching crossroad so when I pressed the clutch and the car stopt rolling, the engine stalled 2. from standing still...in first, WOT, tires...

The 383ciu 4BBL from my 1965 Dodge Coronet now carries a hidious Mopar Performance aircleaner. I found a original one but only has one snorkel. I was wondering: should it be one or two snorkels? Thanks!

Hey all, I found out that there's a 3" crack in my shortblock between the two freeze-plugs on the drivers-side. Looks like it's there for a long time because of the rust-buildup in that area. A friend of mine, who works at a truck-shop (Scania), told me about a liquid sealant I could use...

What are the symptoms of bad synchromesh rings? reverse: fine 1st: fine 2nd: have to use some persuasion 3rd: fine 4th: fine Could it be the shifter setting?

Hi, Config: 383cui with Edelbrock AVS carb, headers, electronic ign., recently converted to a 4speed. I have problems getting the engine to start. That means, if I drove the car, put it away for let's say a week, it takes real long to get her to start. But...it also happens when she's...

So I installed the 4speed and made my testrun yesterday. It was awesome... My Zbar alignment isn't quite as I should be. Nothing touches, scratches or makes funny noises and I know it's not right, but is it bad? The bellhousing ballstud should be placed back about an inch or so... The...

Hi, My rearend (489-casing, 4.10:1, 8.75) is leaking and I hoped it was the gasket but...well...it isn't, it's the seal. Is there a quick'n'dirty way to fix this? Thanks!

So I got the wrong bellhousing with my tranny. I didn't notice until I got all the parts and made a mockup. So there's 2 things I can do: 1. order a new bellhousing 2. machine a ring (spacer) to fill the space between the bellhousing and the input bearing retainer. I choose the second...

Ok, which bolts to use to tighten the clutchfork pivot on my bellhousing? Bellhousing is from a 1969 B-body, 11"... Thanks!

Ok, the facts first: - 65 coronet, original manual shift - 69 bellhousing (11" #2892626) - have original frame stud for original z-bar The ballstuds come on the frame and on the bellhousing. Which bellhousing-ball stud do I need to align the zbar correctly? Thanks! PS: link to...