Search results for query: *

Thanks for all the help I ordered a new master cylinder and booster from Pirate Jacks it works great now the linkage was too long

Ok I'll try it tomorrow I'll let you know what happens thanks for your help its much appreciated

Its in the picture I sent earlier i just drilled a new hole in the original bracket because the booster rod was lower than yhe rod from the master cylinder

I'll try to get it for you

Yeah I just did it seemed to help but I think I'm out of adjustment and I still have a full pedal

I also have a 68 fury parts car would any of the brake pedal linkage work on the belvedere?

67 belvedere master cylinder and booster

They are dragging and I have adjusted it some but maybe not enough

This is what I have but after looking at your picture I think my rod from the bracket to the pedal may be too long

I have adjusted it but I'll try to adjust it again thanks for trying to help

I did adjust the rod but maybe not enough I'll try adjusting it again

Im not sure I cant tell for sure but yes I did get the booster and master cylinder for disc drum do you know of a bracket or something to connect the booster to the pedal

I did and everything seems to work good except for the pedal when I put the booster and master cylinder on the rod didnt line up with the pedal I have a bracket fabricated to make it work I did notice the with the rod not hooked up the pedal still won't go to the floor it goes about half way I...

I switched my brakes on a 66 belvedere to disc on front drum on back also I went with power brakes now my pedal is too high with no travel causing my brakes to drag any idea what I need to do to fix this problem