Search results for query: *

This^^^^ I do that every day before breakfast, it's a ritual!

That is a hell of a deal! Anyone just starting in this hobby should have a set like this. Mike

Thanks, I'm gonna check it out.

Bottom of glass in the center. That's way I remarked about the tree reflection. Hella makes them in different angles to match your glass installation. Mike

B3R kit on my Stealth heads, Hughes 1.5 ratio rocker arms, .57" valve lift. You can center it up pretty well. Peace of mind? Yes.

A good solder joint is just that. A poor joint will leak. I have made 10s of thousands of soldered joints over the past 50+ years, you cannot resolder a joint unless you start from scratch-it must be clean! Mike

These 23 drivers and C-4171 9" handle came out of a closed down Chrysler-Jeep dealership. $110.00 shipped in the USA.

I was thinking about doing that on my 67 Charger. Where did you mount the light? I can't see if in your picture.

MD6XP ... yes, I used one under my '69 RR. I was very useful to strip the car and do some mods as well as to do the full reassembly this past year. HOWEVER, they aren't the handiest thing now that the car is finished. Access to the middle underside is very restrictive. In my case the car sits...

The only issue I see is the worm clamp on the inlet hose. A spring style clamp would be better. The rubber will relax under the worm style clamp and loosen. A spring style clamp will always maintain correct pressure on the connection. Mike

The prior owner of my 67 Charger had a pertronix II in it. He used a stock coil and never bypassed the ballast resistor. After changing the coil I was able to get the engine running. It did run with the ballast resistor still hooked up, but I found it was harder to start when hot. So I just...

Perhaps what's needed here is a "Renton-esque explanation". I believe that this is his area of expertise. If you research the facts, a 5 blade moves more air vs: a 7 blade fan.

I'll cover it with a wet damp rag. Thanks

Seems reasonable

Thanks, this is what I was wondering. Should I do both sides or is the outside good enough?

They have it at Rock Auto