• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Order by date
  1. S

    Glove box lock install

    I'm trying to install a new lock on my 72 glove box. I know there's a tab that has to be depressed to lock the cylinder in to keep it from coming out, but it seems that the cylinder is too long. The same is true for the old lock. I can't push it in far enough to get the tab to engage...
  3. B

    FOR SALE 2 thermoquad carbs

    Hi John, I have them all packaged up the box is 20x14x12 19 lbs <Address Deleted by moderator. Please use PM system for safety>
  4. S

    Mopar Diamond Like Coating / Lifters !!

    If the lifter is not machined correctly I am not sure the coating will make much difference - they will most likely still fail. Even if they don't wipe out the lobe, the modern one's leak down very fast, noisy, and no coating on earth will fix that. The quality control is rubbish when they are...
  5. Pecos Bill

    On an LTD frame? WHY?

    It's a stunt car built with reproduction metal.
  6. River Rat

    DLC Lifter break-in success. Budget 440 build.

    I tried a set of the Comp DLC hyd lifters on a 440 build I put together with some spare parts I had laying around. Comp DLC hyd lifters Lunati 703 Cam Cast crank ICON pistons Below are some videos… Break-in Idle
  8. R

    whats the casting number for caliper brackets ?

    I got a set of 11.75 rotors from a 75-77 newport, will they be the right ones to use ?
  9. RemCharger

    1964 Polara power windows question

    If you take the motor off the regulator be careful , do some research. Don't want to cut your fingers off
  10. R

    727 push button shift cables

    If you still have that conversion kit. Could you post some pictures of what special items were used to make it work ?
  11. themechanic

    Share a driving tip you use.

    Both hands on the wheel at 10 and 2.
  12. 3white74

    FOR SALE 68 -70 b body headliner rods

    Sold thanks fbbo
  14. wahya

    Share a driving tip you use.

    Been mindful of this for many years and when on the Interstate I most always moved out of inside lane when approaching an overpass. The wrong way drivers mostly seem to drive on their perception of staying to the right lane. These wrong way crashes are becoming more frequent.
  15. hemi71x

    FOR SALE Mopar Chrysler 1964-65 Race Hemi Superstock Factory Exhaust System. Headers & Pipes.

    :usflag:
  16. hemi71x

    FOR SALE Mopar Chrysler 1964 Superstock Race Hemi Aluminum Crossram Intake Manifold, Carburetors, Linkage, Fuel Lines.

    :usflag:
  17. hemi71x

    FOR SALE Mopar Chrysler 1964, 426 Race Hemi, Superstock Crossram Carburetors. #3861S.

    :usflag:
  18. hemi71x

    FOR SALE Mopar Chrysler 1964-65 Race Hemi Superstock Dual Point Distributor. #2444851.

    :usflag:
  20. hemi71x

    FOR SALE Mopar Chrysler 1964-65-68 Race Hemi Superstock Aluminum Water Pump Housing. #2205862 & #2536767

    :usflag:
  21. 65 Dartman

    1970 Dual Snorkel AAir Cleaner

    I stopped by to make an offer on the air cleaner - I was prepared to offer $50-75 and no more than a $100 for it. Found out he’s getting ready to move. Said air cleaner and a bunch of other stuff was in a pile for the trash man. He said that air cleaner is no good to him and told me take it...
  22. RemCharger

    Can this get worse ?

    Sounds like an industrial mill
  23. padam

    Mopar racers big race of the year at Norwalk

    There’s a bunch of fine looking race cars here today. I haven’t even been to the show side yet
  24. torredcuda

    `70 road runner, FC7, 383, 727 It`s waited long enough, finally time to get it done.

    Sprayed the engine bay with epoxy and high build primers.
View older results
Back
Top