Search results for query: *

Brand new, never installed Alterktion front suspension with wildwood disc brakes. 300# Springs appropriate for a big block car. Includes sway bar and all installation hardware. On a pallet ready to ship from Celina Texas (North of Dallas). Over $6300 new and I think they are a couple months...

Hey Folks, I have a freshly built stage 5 4L80 with a billet converter. It has a Reid dual pocket bell housing, billet input and output shafts, setup for 1500 horsepower plus. Receipt and warranty. Perfect trans for worry-free operation behind a hellcat or hellephant motor. $7000 shipped in...

Here's what I've got. All this stuff has 100 miles or so on it. Aje front suspension Coil overs, tubular upper and lower control arms, sway bar Powder coated any color you want Wilwood dynalight discs 3000 Freak ride 4 link setup Moser fabricated 9 inch, 31 spline axles with mopar ends, and...

Aluminum case, billet support, wavetrac posi w lifetime warranty. 3.73 gear and 1350 billet steel. Rolled the car around on it, but no street time. 2100 new. 1400 firm Located in North texas

Everything you need to put a 4L80 behind your gen3 project. This is a new transmission, converter, adapter, TCI trans controller and driveshaft. They have been in and out for mock up but that is about it. I have $6200 in this setup and I have gone off the deep end crazy with my build so...

This is a brand new set. I had them ceramic coated black. The collector flanges come with as well as the bolts. They have some very minor scuffs in the coating from sitting around for a few months. This is significantly less than I paid when you consider I spent $300 to have them coated...

I have a fresh gen3 426 hemi. It has a manley forged crank and rods. Wesco pistons. It was decked, line honed, has main studs. It's 11:1 compression with an eagle or or 10.5 ish with a 6.1 head. I can get you heads and cam to complete the motor. The cost will depend on how elaborate you want to...

I have one from a customers vehicle that has under 8k miles on it. It has been refurbished. Includes a new accessory kit. Comes w a predator tuner. Includes a ported stock throttle body and a custom cold air intake. It was over 9000 without the throttle body or intake when he bought it. 6000...

I have the kit I was going to run on my car but I am going to go a different direction. It includes everything needed to run a gen3 hemi with a fast system. Everything is new except the ecm and main harness which has been inspected and tested. It has the most current update in it as well. It...

I have a set of 1 inch drop mono leaf cal trac with calvert adjustable shocks for sale. They have next to no miles on them (maybe 100). I am switching out to a 4 link setup. $600 plus the ride

I need $1200 plus the ride for them. They can be cleaned up and run. No street miles at all. About 60 passes at the drag strip.

This stuff has around 100 miles on it. I'm swapping out to a coil on plug setup Msd 6AL Msd billet pro distributor Msd blaster 2 coil Msd 8.5 black plug wires $650 on summit. $400 shipped in the 48 states. Posted via Topify using iPhone/iPad

****Updated to include fuel system and complete ignition**** 40 over 440 12.5:1 compression Eagle forged cranked Manley forged rods Ross forged pistons Hydraulic roller cam 242/248 .600 .610 110 (Aggressive ramps w supporting springs) Crane hydraulic roller lifters Indy ez-1 max wedge port heads...

I have these left over from my build. They are brand new and never used. $200 shipped for both

So in upgrading my heads to EZ1 heads I needed to switch intakes. This one has been smoothed and black thermal coated. It's stock port heads like an edelbrock rpm. $700 into it. $450 shipped Posted via Topify using iPhone/iPad

I am going bigger with my 440. The heads,carb and cam have about 50 miles on them. Crane Hydraulic roller cam - 230/236 .570 lift 112LSA, idles nicely at 750 Edelbrock Performer RPM heads - 88cc, minor porting work, crane dual springs good for .600 lift roller cams. Weiland Team G...

I have a 440 block that was virgin before I put it through the machine shop. It is now 30 over, has billet steel mains. It has been machined (or will be shortly), will be line honed for the mains, decked and ready to be built. Ill include a girdle, a gasket and bolt kit, and any other extra's...

This trans was in my 64 for a short time. The clutch and slave are included. $1500 plus the ride

This is a motor built will all brand new parts. Its a 1000+++ horsepower shortblock. It is complete and cover to cover. Ready to run, you can pick the cam. No core charges. An outright purchase. Includes the ECM, wiring harness, coil packs, 6.4 hemi intake manifold. Includes front cover...

I have one for sale. It is check and in good working condition. It will need the sensors replaced. It includes the bell housing for a 5.7/6.1 hemi