Search results for query: *

Just finished painting my rear and wanted to post a few pics. I got the brace ideas from Blue Missile on the a body site. Its a 4.10 ratio 489 case cone clutch in an a body housing with the spring perches moved out a half inch for a little more tire clearance. I have the moser axles with 3 inch...

Thinking about moving the perches out on an a rear and bolting it in my 66 net. I figure this will give me the inch of clearance i need for my 8.5 inch coke bottle americans. Am I crazy?

At static height,car sitting on all four tires level how far should you be able to push the yoke in on the trans if you unstrapped the rear u joint. In other words how far from bottom should the front yoke be at rest. Or how long should the driveshaft be in a 66 coronet with a 727 and 8.75...

Initially starting my motor. how much advance would you start out with for base timing? 500 cube indy head 600 lift solid roller street motor 10.5 to 1 on 93 octane. I,m thinking about 8* with centrifugal adding 24* more. any opinions?

I have a later 727 in my 66 coronet. in 66 there was a ground wire from the relay to the trans. I have a 3 prong plug on my trans . Can i just pull the 3 prong and screw in a single stud switch so i dont have to monkey with the wires. I know i could just ground the wire but that doesnt seem safe...

If anyone has used a stock tank and electric pump post a few pics of routing and install. looking for ideas. Also did you drill the tank for a return line. My 66 only has an outlet on the float assembly into the tank. thanks. Been outside working on it and have a new plan and would like some...

We dont have an air fuel section so i,ll post here. I need pics of throttle brackets for big dominators.I want th cut and polish my own out of aluminum plate. No kickdown,manual valve body. will the stock pedal cable have enough travel for a dominator? heres a pic of where i need to fab the...

anyone know of another crank pulley that will realign the belts when you use a fluidamper balancer on a 440?

Morons at auto parts cant help. Anyone know the part no. for a 7260 7290 combo u joint? I have an inside measurement of 2 1/8 on my driveshaft and 2 5/8 on the yoke. i lost some needle bearings so i need a new one.

Someone fill me in on 5.0 hemi kickdown levers. what is used normally and where is this in the trans? Or is it external ? Is it the lever on top of the shift lever? If this is the case I dont need one due to having a manual valve body.

anyone have pics of their scattershield on a 727 and did you have to use a bfh to make the tunnel work?

anyone running ezs? what short plug did you use and what wires? anyone have a reccomendation for a plug ? 500 cube flattop 10.5 to 1 With a mild roller cam.

is this for real or the wrong info http://cgi.ebay.com/ebaymotors/Mopar-8-3-4-8-75-Sure-Grip-Posi-Trac-Locker_W0QQcmdZViewItemQQcategoryZ33731QQihZ019QQitemZ290247016903QQrdZ1QQsspagenameZWDVW