Search results for query: *

Not sure if it appropriate to bring up an old thread or not, but here goes! I am finally back on getting spark to the dizzy and although this is supposed to be simple I need a bit more input here. I was reviewing this topic and I just now saw that becuase I am running the MSD RTR I would more...

I do still have the old one to answer that question, enclosed is a pic of the back side of it. All the guts ran out of it down the firewall.

I do have the old one, but all the guts came out of it and ran down the firewall. Car has no spark, but I have yet to really dig in the troubleshoot the issue. I’ll keep the old one and install the new one as a shotgun approach. If still no spark, I’ll start tow ts it.

So what happens to the light blue/yellow wire that is in the 5 pin?

I was looking online for a new ignition module. When I fill out my car info on several parts sites, it says it will not fit my car when I select what I believe is the correct module. Mine is a 5 pin module(see pic), but the sites seem to think it should be a 4 pin module? Any input would be...

Vaanth, thanks for this. The car does have the tilt column! Another mystery solved on this car. Thanks again!

72RR, I was able to have another look yesterday and I confirmed the tach wire (Gray White) is in place. The wire in question is definitely Black/White.

Thanks much, I'm hoping to get back out in the shop to have a look tonight!

I was able to have a look at the heater/AC control unit tonight and I do see a black/white strip connected. So, that black/white remains a mystery!

I was so focused on the wiper switch I didn't even look at the heater control! I'll get a chance to have a look maybe later today. Thanks a ton Nacho-RT74 for the help.

pnora, doesn't show it. It does show the same wire (black/white strip) for the light switch. but I don't see anything for the wiper switch.

Enclosed is a picture of the wire. It seems to be a ground and it is in the harness that contains the wires for the windshield wiper switch. I don’t see anywhere on the switch that looks like a tab broke off, but who knows?!

Got you! Thanks!

Ok, wow! outstanding info. I'm glad I didn't do anything yet. That red wire is so short from the fuse block/power window relay over to the breaker in the kick panel I'll need to reroute or replace it. I'll have another look. Thanks much!

Folks, once again I come here to seek advice. Hopefully at some point I will actually be able to help as all of you do. I am still working through a few issues with the wiring. Today’s effort is in and around the fuse panel. Enclosed are a few pics that show a red wire from the relay mounted the...

I really appreciate all the help so far on this car. I did have a chance to drop the column and now I can see the other mount location for the switch. Second pic is the cruise control leaving the steering column, never have found the other end. But, with the column out I will be able to have a...

70chall440, I no some one had mentioned that to me before as it is a tilt column. I’lol crawl under there again to see if I can find the other mount points.

Thanks pnora! I had no idea there is more than one screw to hold it in place. I'll take your advice and drop the column to have a better look.

Ok, Not sure if I should be calling it the switch or the relay, but it is the aluminum box under the dash along side the column that contains the rod(s). See picture 1. My issue is the little screw that is supposed to let you adjust the relay module I guess? Mine either has the wrong screw...