Search results for query: *

I must be cheap, my cut paper clip trick looks like that, but minus the handle.

Are there 2 tabs? If so, cut a paper clip so it's "U" shaped, and then push down on each side to release. It worked for my 65 Belvedere.

Looking for power steering hose heat shield for a 65 Belvedere.

Looking for SS molding for a 65 Satellite or Belvedere with a padded dash that goes above glove box door to help hold the padded dash down. The molding for a 64 is not the same. It is two pieces that goes from gauge cluster to glove compartment. What I'm looking for is only 1 short piece.

Success. Maybe this might help someone else. If your column is disassembled this worked for me. Since my C clamps only were able to catch edges and not able to apply enough pressure, I drilled a hole in 1/4” steel plate so the steering shaft would slide through it. I then used another piece of...

Rebuilding my steering column on my 65 Belvedere. I bought the black seal with the clamping cover for the universal housing. The cover looks to be a little thicker and the tabs to seal it to the coupler also appear to be slightly short than the original. I tried clamping before closing the tabs...

Is there another molding piece? My molding ends above radio and does not extend above glove box door on a Belvedere. I think Dodges had molding above glove box.

Does anyone have a 65 Belvedere with a padded dash? I'm planning on installing one in my car. I have the dash and a pattern for the holes for the installation. Here is the question. The pad has a flap that will be held under the molding above the gauge cluster. How is it attached where the...

I'll bring individual bags of snacks.

Is the horizontal dash molding above the gauge cluster and radio on a 1965 Belvedere II the same length as the molding that was used if it had a padded dash? Parts manual shows different numbers for moldings. Does anyone know what number would be correct for molding that was used with padded...

Steering column cover for 1965 Belvedere

Got red dash today from ABC Moparts. Very satisfied, red appears to be exact match for my red Legendary interior. Bob Baker was great to deal with.

Sounds good. I’ll send you a note in two weeks

Planning to install padded dash in my 65 Belvedere that didn't have one originally. Does anyone have pattern or measurements for the mounting holes? Thanks

I'll be 77 in February.

What script date code spark plug wires would be used on May built big block 1965 Belvedere? It seems that a 3rd quarter code would be used for late 64 and early 65 and a 1st quarter code is used for late 65 early 66. Is this correct? Thanks /

I went with a different color so I don't need these. I have had these for a number of years, and they are still in plastic and have never been opened. These are from REM Automotive: 64/65 Bel/Sat package tray std (2 piece sewn) black 64/65 Bel/Sat HDTP sun visors Bison #100 black 64/65 Bel/Sat...

Anyone have a 1965 Satellite or 65 Belvedere II with a vinyl roof? If so, are the drip rail moldings the same on a car that doesn't have a vinyl roof? Thanks

So, does one bolt go from the front and the other two from the back side?