Search results for query: *

What starter?

That should be fine. As long as its not kinked, binding, rubbing or on a exhaust manifold.

Thats what I did. You can buy the pigtails on e-bay cheap.

Just wire in the factory harness. You will need to source the connector to plug into your switch connector. Or just find a 2 pin Deutsch Connector.

So did that fix it?

With those photos the MSD box is not being used. If it was the coil would be driven off the MSD box which the photos show it clearly is not.

Eliminate the possibilities. You are obviously overlooking a very simple system. That red wires ends do not look healthy either.

Wrong thinking.

Get that old condenser out of the system and run the wire from the distributor to the coil negative. Are both point sets opening? Is there 12 volts to the coil with the key on and when cranking? You should be able to trouble shoot that in minutes.

No.

Reverse the diode.

Doesn't the key in buzzer only have 3 pins?

Only 3 wires pretty simple.

Unbolt the pump and start it see if the noise is gone.

Yup.

Need more info than that. Casting date, stampings, possible VIN.

You should of immediately filed a claim as damaged. The process to take care of the situation would be on them. They are the shipper and they have processes to claim the damages. At that point they would of had to make it right or e-bay would side with you and allow a full refund. Well you still...

I do know without the carpet on the floor and the carpet trim on the console it sticks up quite a bit. If it is sitting right and the holes line up on all 3 brackets you should be ok.

Not 100 percent sure but it sure seems like all the tray fasteners were painted over.

So it was 345.00 where to you get 670.00? Free shipping and they tell you how it was being shipped. Returns are explained. 3 year warranty. Looks like for less than 40 bucks you could ship both back. Priority Mail International - Rates & Features | USPS