• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Order by date
  1. RemCharger

    Smoked a regulator?

    They sometimes ground them by replacing the insulation washers with steel. No actual wire.
  2. 19bee70

    Start circuit question

    Exactly ....I pushed hard enough, I think, to connect and after checking for power by probing for power on the switch side of the connector I have hot power. I have the column partially disassembled now to follow power thru the switch itself.
  3. TorRed

    1970 Road Runner Dash Pad Removal

    So can you pull the dash frame out without taking the windshield out? If so, how difficult? Thx
  4. 19bee70

    Start circuit question

    Sweet....thanks DVW....I'll follow the power flow you laid out here and see if this reveals anything!!!
  5. Triplegreen500

    Bug removal from front end of our old cars??

    Don't use it on bike chains though, it attracts and holds sand and grit which'll kill your chain and gearset in a hurry. 0
  6. threewood

    Northern lights tonight in Iowa pic

    Not as good a show last night. Nothing visible to us, but we did get some red hue in pictures.
  7. 19bee70

    Start circuit question

    Don....I think I left out a crucial tidbit. I can start with a remote start switch under the hood and that is without any worry of the neutral safety working or not. Yes, the trans is in neutral but I'm not using the 70 specific lock out device. I also have a bare post on my relay that, looking...
  8. threewood

    Black Oxide Kit by Casewell

    Those bolts were directly out of the blast cabinet, hosed off with Brakecleen.
  9. 19bee70

    Start circuit question

    Ahhh ....a ground lug?
  10. Coelacanth

    Kids, Permanent Black Markers, Classic Cars Don't Mix

    Me too; 99% rubbing alcohol usually takes care of Sharpie marker, but the fresher the marks are, the better...and the less porous the surface, the better. Do not use oven cleaner on a painted surface. That **** will remove aluminum anodizing. That's what I use it for, actually. Anodize removal...
  11. hemi71x

    Hello, from Germany

    Hi, welcome to the site. What city in Germany? Spent 2 years in your country at the Zweibrucken, Air Base, back in 1974-76.
  12. M

    My Six Pack seems odd

    Free help is now closed Today's gasoline is formulated to run in engines that operate with a min operating temperature of 195 degrees. A lower min operating temperature of 180 degrees or worse 160 degrees; allows raw fuel to collect on the intake surfaces and engine oil that never...
  13. Coelacanth

    Bug removal from front end of our old cars??

    I've used WD-40 to clean practically every form of plastic, nylon, metal and painted surface of vintage RC cars for decades. Used it everywhere on bicycles to clean everything up in a pinch. It washes off easily with dish soap and hot water. You just need to re-wax and re-lube a previously...
  14. DeltaV

    1979 Chrysler 300 Registry

    Thank you for the heads up @azblackhemi *** No VIN in FBM ad @LS-300 *** NOT MINE 1979 Chrysler 300 , no title , $800 Cars are located in Bangor Pa , bring a trailer and cash. Seller: Jon Ponulak Location: Bangor, Pennsylvania Listed 14 hours ago Facebook Marketplace Classic and Muscle...
  15. TorRed

    WTB 340 air cleaner

    I have a trap door 73 340 air cleaner, let me know if you want to see pics
  16. HEMI-ITIS

    Random picture thread

    moved this 455 Tempest yesterday
  17. toolmanmike

    Power Trunk release

    That's the one I used as well.
  18. oldbee

    Hello, from Germany

    Welcome aboard from Ohio in the USA.
  19. Jerry Hall

    Ported 906s

    I know an engine builder that coats the inside of blocks with a red, I assume some kind of epoxy.
Back
Top