Search results for query: *

Hey Shaggyracer I might be able to help you out. Can you post a picture of what you have. If the same as the 73 there are two chrome metal clips that cover the screws that hold the strap in place. For a number of reasons these bits always seem to go missing. I always keep my eyes open for them...

Similar specs on my recently checked spark plug in my xj. Ran fine. Ran same after new plugs. Haha

screw it into place......... enough to hold it, but dont over screw it mock up fenders, hood, ect........ the sheet metal will tell you everything you need to know

I must have ordered the 440 source extra thick timing cover with the cam button reinforcement. Just open up the box yesterday and the cover is really nice and thick. Haven't mocked up to a block yet. Also got the extra thick oil pan, and it looks really nice. These are real heavy and the...

"AB-30" 273 CID V8 Fendertag, is correct for 273 V-8 2-bbl. carbureter engine. Should-have number's "273" on hood ornament, & small "V8" emblems on frt. fenders, as your does... Also, the 273 engines in B-body cars in 1965 were painted in a bright red color, specifically referred to as: "Mopar...

Is she going to see that coment????

The donor is back and cut to match. any concern or advice?

This sounds good to me as well.

Following up on my transmission leak situation. I ended up taking the throttle body out. This allowed easy removal of the metal ring outer shaft seal. New issue I cannot get a new seal in correctly. Bent 2 already smh. Before I try again any tricks? Mabye heating the transmission area with a...

My son knows them. I have been known to miss the tree myself. See 2nd round in Superstock on Wednesday against my son. One second red light in my Demon against his Duster

Still available

Still available

Still available

Still available..

Yes, I know the feeling not an easy task.

Thanks. That’s what I thought too. I’ve installed quartz conversion kits in E body rallye clocks and the hands pulled off easy. This second hand on this tic toc clock is really stuck on. I’ll try again today. I’ve had a small fork like tool underneath with some decent force and still no luck...

I need the upright supports left and right that weld on to the inner fender that support the deck lid hinge for my 69 Coronet. Tyler @ 6195046123 thanks

I just went through this with my 69 RR. The car had a new sending unit and new gauges when it was restored in 2019 and the FG would only go to 1/2 tank when full. I did the ground the wire trick and the gauge went to full. I tried to take apart the "new" sender, and it literally fell apart in my...

I have a similar question. I am looking for a '63 440 drivers side front window glass (tinted) for a wagon. I was not sure if glass from a '64 sedan or wagon will fit.