Search results for query: *

I’m not sure my reverse shaft seal is leaking. I think I have a slight seep on the 3-4 shaft.

This works...

Power window door downstop/snubber assy. Does anyone know whether or not the power window downstop/snubber bracket is the same for both doors or are they left- and right-handed? I cannot find these parts in my 1970 Chrysler parts catalog. _______________________________________________...

I'm interested in buying it, if you would like to sell them. Let me know what you would like for them.

OK - that’s what we used to do as a cheap fix on Muncies, clean the counterbore area fill the slight recess with RTV and slide it into the bell housing and cinch it up. Thanks

Mine was leaking at the reverse gear seal.

Nothing. It holds moisture. Moisture causes rust. It was an option on my year anyway.

Do you have a stock hood now ? Suggestion : Measure and scribe the area for the clearance required. Measure height above stock hood for clearance required. Research scoops that would suit your requirements, for both area & height. Cut hood within the new scoops configuration. Glass the scoop...

Yes - I had a spare yoke I slid in the rear. Wasn’t quite ready for the lube that ran out the front though when I loosened up the bolts a little.

Sweaty Rabbit…are you needing a 4376 center for a 70 model or a 69 1/2 A12 center carb? The A12 carbs did not come on 70 models and have 69 1/2 part numbers that are different than 70 part numbers. Also what are you asking for the 4144?

Be done in no time!!

That is my intention as mechanically it’s functioning fine. But I would like to replace the tail housing gasket, fix whatever is going on up front, and install shift fork seals. Right now I’m hoping that doesn’t get into pulling it all apart. I’m hoping I can just unbolt the tail housing and...

I feel your not wanting to hurt your back. This was my way to install my billet 48RE converter after replacing the front seal and bushing. Sorry about the sideways pictures. I love thinking outside the box.

Sorry, wrong link, try this one - Northeast Mighty Mopar Club | Facebook

The early redneck versions did not have the red tension straps. :lol:

yes they were! What is the name of the facebook group? When I click the link it takes me to youtube.

...Details (driver side door for reference): Bracket, rubber snubber/bumper, and mounting nuts are inside the door. Looking downward and outward: *** Looking forward: *** Looking aft: *** Plate with two threaded "bolts" is inserted from outside of the door. Looking upwards at bottom...

Weld the piece in or use steel pop rivets and sealer. Mike

Thanks for the pics Wayne. I bet my fuel filler grommet is in backwards. :thumbsup:

Any examples of what I think you are proposing is to leave the entire shock mounting area and weld the front down bars to the top of the rails and the shock mount, leaving the top and horizontal sections of the inner to bolt the outer fender to. Is that your plan? If so you will only gain a...