Search results for query: *

Let us know how diet works compared to coke?

Sounds like your console has been trimmed wrong and there is no plastic there. Look at the photos below. The far right (3rd) bracket has an oblong hole on the driver's side where the screw goes. Now look at the console on the front where the oblong slot is that is where the screw goes but is...

Do you mean roller lifters or rockers? If roller lifters do you mean hydraulic or solid? What is your budget? Hyd roller cam and lifters is cheaper than solid roller but still a $1000 not counting valve springs,pushrods,etc.

My 65 was 3941 with half tank of fuel, iron headed 440, a/c, a/t and no driver.

Christine! Nice car you got there too :thumbsup:

I looked at my paperwork and batteries new in 2022. I did the cables in 2023. Never added water to batteries. What I don't get is why only one terminal. Coke works good on this too - the kind you drink. I like agm batteries and at next replacement will do that. Thanks fellas Frank

Yes to# 1 and 2

Ill probably be selling them when im ready to buy aluminum stealth heads.

Oct. 4, 1957. I wasn't born yet.

Except my dually sits too high to make any use of those ramps. I have 8' long ramps that I use for loading and unloading my golf cart and quads and that is still steep.

Those are the two big bolts at the bottom? No way in hell would a factory bolt shear off vs ripping all the aluminum out.

Thank you Dave . Its been a good day so far.

You're lucky that this happened with the unit outside the car. If it was in the car :cursin::cursin::cursin::cursin:

YO and Mega parts want $800 for the M&H harness. At least YO will ship it for free. Mega wants your credit card info then they'll contact you with the total will be once they decide how much they're charging for shipping. That harness is on backorder at M&H. YO website tells you it's on...

Probably. Most jets, by their design, are a pusher arrangement. :)

Got Magnum 500’s on the 65, We got her running and charging…. Driving her around now… best thing for a car that Sat a bit… We did Carb rebuild, Points, Plugs, Cap, Rotor button , Coil, Fuel Pump, fresh Gas, Oil and filter change. Replaced a lifter, new Alternator, Voltage regulator, Battery, &...

Flattops can be anything from 7 1/2 to 11 1/2 compression ratio, depending on stroke and deck height. Do your pistons have valve reliefs? How far down the hole are they? We would need the accurate comp ratio (NOT what Chrysler or the piston manufacturer claims!) to begin to make a cam...

I can look at ours possibly in the next couple of days. Unless someone can explain it beforehand.

We got down here this afternoon. We’ll be at the show tomorrow. It’s always a challenge to absorb it all in!