Search results for query: *

YO, Who do you think Mega gets their harnesses from? Jamie gives a 10%discount anything over $1,000. Your replacing only the dash harness? There are some others factors here as to why I know that he's cheaper for the same product. Since we're all smart people here, sit down and figure it...

Still up for grabs with lowered price to $500 or make me a reasonable offer. Clean original N96 hood - rust and dent free. Includes good hinges, latch, radiator seal, Plymouth emblem and 440 “call out” emblems. Does not include any ducting or intake “grills”. Located in Twin Falls, Idaho

That had to be a pretty neat moment making that connection.

All of the above, every engine is different. One thing here, we all seem to agree that the rods have a lot to do with oiling the cam and lifters. Had an argument here 4 or 5 years ago with one of the engine builders here. Said that wasn't so. I just ended up walking away. He hasn't commented...

Looking for the middle grill piece pictured here. As long as it’s structurally sound I’m fine with putting or chrome messed up. Message me if you got one. Looking for in States.

...I get what I want. Thus, dish detergent on vinyl. One can always go harsher, but you can't back up and fix something that was damaged by cleaning.* There have been antiques that I cleaned with only a cotton cloth and light rubbing. The patina sometimes confirms authenticity and often adds...

I will be out where my car is on Monday and will take more pics and post them. I hate being such a dumbass but appreciate everyone trying to guide me.

Does your console look like the one in the photos above? Specifically the large opening on the driver side? Maybe you should post a photo of your console WITHOUT the 4 speed cover plate. It does sound like your console has been cut incorrectly and is missing part of the plastic where it attaches...

The vent tube was broken on my van. Plastic tank, 25 US gallons. When I filled up, fuel would escape out the vent, and create a puddle on the ground. I discovered this half way to Inuvik on the Dempster Highway. Later I dropped the tank, put on a new vent line and made sure it ran up hill. At...

When I hear about the cost of motel rooms, I do not worry about 14 mpg of the Tukvan. Too, we split the costs, so Shirley pays half of the costs. Which means the Tukvan does 28mpg, which is about 25 to a US gallon. We donnot have tne 85 octane here, and the Tukvan does not like it. So 87 is the...

I have 2 727 transmissions in northern colorado. these are from international scouts. there might be some usable parts inside. FREE. would rather give them away to someone that can use parts rather than trash em. contact me for location for pickup.

As R/T BOY said to put grommet in, difficult. I removed the vent tube by drilling the spot welds on top of tank to cut the straps holding tube. Installed grommet fished .015 copper wire through the 2 holes where straps were. The wire was to hold the v tube. A shamy way to do it, was just...

Do you know if these would fit Fred Brewer heads? (His heads look like B-1s on steroids) South Bend Ind

Everything has changed since then. 1. Camshaft profiles- much more aggressive than earlier grinds as we try to leverage all the benefits of the .904 lifter, more prone to failure if everything isn’t “right”. 2. Metallurgy and manufacturing- maybe not as tightly controlled as before as we’ve...

68

That is so nice looking. Put a 4 speed in it and I’ll buy it.

Thanks