Search results for query: *

Thanks guys. Not looking forward to the job, but at least, through your comments, it doesn't sound like a real back-breaker. Thanks again

Springs can be reset. They need to be in good condition. Many years ago when I put a Dodge rear end in my 37 Ford hearse, it sat too low when loaded. I called the spring guy, on a weekend, he said bring it over to his home. There we jacked it up, removed the springs, reset them ( he did ) and...

Nice video , thanks

Adam @68BabyBlue may have some insight :)

Hi all, I was reading a few posts on how to adjust window glass and they helped quite a bit. I saw this post where Dad'sbee shows some pics which also helped: Window adjustment question My question is - Is there a way to tilt the top of the vent window outward? When I close the passenger...

Cudadude, can you post a link to that?

RIP….mon

not even close. comp is on a 110 LSA and 6401 is on a lazy 114 LSA. 6401 has more exhaust duration which also hurts bottom end and more advertised duration hurts bottom end and a 114 LSA hurts bottom end and the slow ramp speed of the 6401 also hurts bottom end.

Its gotta be hard then to find someone who still know how to balance them correctly.

they must be good for more than 510 lift.

who doesn't like a good hummer?

After getting a smaller hone and trying to clean the bores up I realized the rust pits are too deep so probably won't seal well and tear up the new rubbers so I'm searching for better ones. Part number 2881613 if anyone has a couple to sell me?

Happy Thanks Giving to all our American neighbours. Kim

Just to add some more to his playlist...cr8crshr/Bill :usflag: :usflag: :usflag: MSN

Hummer??? The current ones are all fake ones. An H1 is the one to have...cr8crshr/bill :thumbsup: :thumbsup: :thumbsup: :usflag: :usflag: :usflag:

Got the hinges assembled.

For those that need it, great advice!!! I do not need a Plan D; however, I do have a Dental Insurance plan through the VA, administered by Delta Dental. The helps out greatly. Vision is another topic for those in need. I can get an annual exam for my vision, and needing Cataract Surgery on my...

Cool video

high lift is good for any rpms there is no downside if your heads flow and most stock heads are good to 500 lift. on one of my 440 with stock heads and a 217-221 cam it pulls from off idle to 5200 rpms.

2 ??? :eek: :eek: