Search results for query: *

...positive caster and any camber would be negative. 74 RR should be power steering right? 0 or neg caster would be for manual steering cars. Alignment tech is going to have to tell you what they can get out of it. Caster +3-5*, adjust side to side for road crown, Camber -.5’ish*. 1/8” total toe.

I know my Dad has it, along with other copies of documentation for the car but I don’t have it off hand at the moment. He had to let it go in 1996 and I know it’s not one he likes talking about, as everyone in the forum can imagine.

Laying cardboard down, to lay on, is well worth the effort. That little bit of 'padding/ insulation' makes all the difference in the world.

That’s what was happening. It only took one turn of the converter to line them up.

Wanted to buy pair of trans Am/ aar cuda or Challenger 340 original rocker arms and shafts setup.... Any help or leads appreciated on febo or fabo.... Any and all help appreciated. Really just need the rockers but will consider a complete set of heads too. Let me know what you have. Please PM me...

https://www.autometaldirect.com/body-components/trunk/trunk-floor https://www.autometaldirect.com/front-floor-pan-full-oe-style-62-65-dodge-plymouth-b-body

Trying to get a picture of all 5 of the grandkids while they were here to spend the night. The dog wouldn’t get out of the pictures. Bella is very protective of the kids. 3 of them are driving now.

I’m going to bead roll an offset on the end of the first panel, install nutserts in it, and the second panel will overlap it and screw to it.

Got a VIN # on that Bird?

Contact Peter at Bergman Auto he will put together everything you need to install a Borgeson unit with no cutting of the shaft required. You won’t be sorry with the Borgeson. Way better than the factory. Contact number from their website. 1(516) 384-6438...

Hey guys . build update. i have found a rb 440 with h beam rods, forged crank, solid roller cam, M1 manifold 904 heads. should go well in the 2 door. looking to get new floor pans. any reccomendations as to where i can source some? also needs interior, seat covers ,carpet , hoodlining ,door...

It was a Lemon twist car. I believe the story we were told was that the dealership painted it black because they couldn’t sell it.

Back to your original question. I don't think you need break in oil at this point. A good high zinc oil should be fine at this point.

When they both want to use the Wii Fit... lol

Let me dig through my parts cabinet and I'll post.

Can be mounted in the engine compartment or under the dash. Amount of assist is adjustable. Jay Leno added this to his 1941 American LaFrance fire truck. His install seemed slightly more difficult than I would anticipate on a early B body with manual steering. Basically there is a company that...

I did a search and didn’t really find anything. I’m also not looking for FSM settings, I’m looking for settings based on user experience of works best.

More negative caster steers easier but, tends to wander at speed. Too much, steers hard at low speed but, steadies that wheel at speed. We must have specs here in previous threads. Mike

That's kind of what I'm doing, two sections. How are you planning to join them in the middle, if you are?

oil filter adapter sold.