Search results for query: *

Gear venders OD ratio is .78, from what I have read. You can use it as a gear splitter if you want, or just use it as one more gear after fourth. You can engage it whenever you want.

Its clear you never messed with a victor type head and a fast 2.0 distributor , heads are not the same !, fast dist. is short , puts the actual dist housing at the same height of the corner of the "UNMACHUNED" victor head ...!

PM

Reviving this old thread in hopes that someone can post a picture of, and tell me the size of the screw that holds the amber lens in the front side marker light housing for the 70 Coronet. I solved the retainer issue by making my own but I still need the screw info. Thanks!

any shade of green! :D

Well, I didn't take into account that you may be changing out your hood, or doing alot of sheet metal work to satisfy your OCD. We are all a little OCD about certain things. #12 Good luck

lewtot184 I like it. I was leaning towards the same simple approach I read above...maybe even your post. I also have the CH28 with dual AVS2 (650s). This would allow me to use the current 5/16" line as a return and update the supply to 3/8" with one less component being the regulator. How did...

...engine compartment temps when driving. This also helped. I performed a test with a thermal coupler on the front carb bowl while driving on an 85* day which was right at the thresh hold of fuel issues. I also have an AFR gauge installed. At 30mph and greater carb was below 90*F and engine ran...

Wanted for 69 charger door and rear panel color saddle or dukes

dark green engine compartment with light green exterior is a HUGE turnoff for me And agree wiring is a mess

I'm using a Powermaster 9523 for my 65. On the 65, it has a 500" Indy low deck aluminum wedge which has a bit wider block. I tried a Dakota starter but that was a for sure no go. The 9523 is clockable with 4 positions. I tried all 4 and got the best all around on the 3rd spot I believe. It had...

I like the RT taillights too. My buddy bought his 1971 Charger not long after I bought my '70 back in the late 80's. He later added the bulge hood, Go wing, RT doors and the RT taillights to an otherwise plain-Jane '71 Charger. He also replaced the original column shift with a console.

Even poly?

I believe so, and a quick interweb search brings me back to the FxBO forums: The 518rh and a500 transmissions will bolt directly to small blocks

I have that tire on mine now. Same R2 compound as the SS. Same 60’ time.

Excellent, although dated info. Thanks for posting.

What is the bore size? You do not want to remove the snap ring.

FYI - Beebest...from your dash photo it looks like you have the incorrect lower pebble grain dash end cap. From what I see you have the non-rallye satellite cap and not the rallye style cap for roadrunner. You can see the silver trim area does not match from one piece to the other. A dead give...

Selling a Hughes Performance Street Master 2,500 Stall Speed Torque Converter, part number HUP-24-25HD. These sell new for around $665.00, I'm selling for $400.00. This is for 1967 to 1990 Mopar (Chrysler) 727 Torqueflite transmissions. 11" converter, 10" bolt circle, 24 spline input, balanced...

I'm looking at a '65 300L convertible (1 of 440 I believe) and it checks a lot of boxes. Drop top, original 413 BB, new Legendary seat covers, top and boot, power windows, driver seat and antenna, rebuilt brakes/suspension, and, according to the seller, rust free except for 'one tiny spot on the...