Search results for query: *

THIS IS TALENT!!! - YouTube

Yes sir. Made in cast iron and aluminum case for a-bodies, iirc just cast iron for b-bodies. Have a 76 cast iron one in my a-body, a cast iron one on the way for my b-body. Forgot to mention, need to get the correct 3/4 arm and rod for the shifter. These are not the Chrysler truck trans or...

They will just spring back. But what works really well? Heat the area where the contact occurs. If clearance isn't suffcient to get at the area you can uses a ratchet strap to pull the header away from the torsion bar. When its red pry the header against the torsion bar. The result will be a...

RIP- one of the legends from the blues brothers

R.I.P.

Don't forget to add the 25% tariff.

Not a crossram, but FiTech. Make sure it is done correctly, wiring, grounds, in-tank pump, timing control, etc. In-tank pump needs ethanol rated hose, not just efi rated.

"Time is Tight" One of my Favorites, R.I.P. Steve

It's not all negative. I believed the negative hype, done multiple front and rear at this point, in the last few years. Not all original gaskets are terrible. My 58 had nice, flexible, soft, original gaskets front and rear. The windows on it have complex convect curves and no one is making...

RIP

800 rpm drop is HUGE. My rpm at 70 mph used to be 3,100 with the 727. Switching to a TKX with a .81 O/D it dropped to about 2,400 rpm. That 700 rpm drop makes a massive difference, to noise, mpg and mechanical wear. Heck, even 500 rpm is significant. Ask others who've done similar swaps e.g...

I went in my local tractor supply here in michigan last spring, the prices were through the roof, was gonna buy 8ft of chain length and 2 hooks would have been over a $100. looked at several other items similar increases. went to harbor freight up the road little to no change on anything. won't...

I know you want one relatively close to you. But there is a beautifully detailed complete axle assembly from a 63 Polara with tapered axles with a detailed painted carrier and black housing in Littleton, Colorado Facebook. (a must see) 8 3/4 3:23 sure grip new seals and good brakes with drums...

Tell me more. What exactly is the A833OD. Is that a factory Chrysler.

Confirmation helps, though. Today at the junkyard, I looked at a few trucks/vans that had Hydroboost. I'm embarrassed but relieved at the same time. I found that in fact, I was plumbed backwards. I had pressure going in where it is supposed to be coming out. Here is proof: This Chevy Astro had a...

I think the 3rd gen Plymouths look better, but I’m partial.

I think the same can be said for first generation Chargers. Until recently you couldn't give them away! They have ridden the coattails of the second gens and increased in value somewhat. They have Imperial build quality and just don't get the love.

I switched from an A833 to a cast iron A833OD for a cross country trip, thinking I'd switch back after we returned home. Nope. It's great, inexpensive, kept my bench seat, no hacking the floor, direct swap to my bellhousing, shifter, driveshaft. 75mph @2,100rpm with 3.23s and a 28" tall tire.

Not a 64 with those axles. No 62 plus drum to drum 65 to 67 B body are the narrowest besides A bodies.

It actually doesn't matter if they are both isolated from the case.