Porta power to get header iff the torsion bar?

[koosh]

Question, stock engine mounts? The engine can be moved around almost 1/2" in the vertical and horizontal. Would this possibly help? Used to run into this with my Dart, until I went tubular front suspension and git rid of the torsion bars.

I have no idea…. I ASSUME stock mounts but really dont know…. My biggest issue is i cannot get on the cold concrete floor with 2 replacement knees and a bad back to handle this! Lol

 

[Don Frelier]

my Dad used to say; "give me a lever, and I can move the Earth"

he was correct

I thought it was mom saying he made the earth move?

 

[eldubb440]

I thought it was mom saying he made the earth move?

it happened once, on the eighth try.......like an immaculate conception

 

[dvw]

They will just spring back. But what works really well? Heat the area where the contact occurs. If clearance isn't suffcient to get at the area you can uses a ratchet strap to pull the header away from the torsion bar. When its red pry the header against the torsion bar. The result will be a perectly shaped and aligned bend formed by the contact against the bar. It's very easy and quick.
Doug

 

[33 IMP]

Wrap a ratchet strap around the header tube you want to move, park next to a tree, and have at it.