Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just wondering if anyone may have come across or can tell me what size these main bearings may be. they look original but No sizing on them just 6-68 TC. I am wanting to re bearing an engine without Removing the crankshaft if possible.
Hi there, Im looking for a passenger side, upper headlight splash shield if anyone can help. You may have an old fender lying around with one still inside it. Let me know if you can help.
Posted a photo of the driver side one i do have, just needing the R/H side.
Hi there, I have replaced the vent window seals on my 69 Charger, i noticed the gap between the lower vent window seal and the door gap it sits it. Does this need a sealant to fill in the gap or just put the stainless trim on? Just worried about water going into my doors if the rubbers not tight...
Yea mines punched from the inside out. And is in the inner wheelhouse. Strange one but im determined to find out why its there. Finding the photo i got of it pre strip showing a bolt and nut in the outer wheel well make me think its retaining something on the inside there. Cheers
Hi there. Its a 1969 Dodge charger. Wheel wells are original to car and have not been replaced. The car was purchased as a rolling body fro Arizona with original paint on it. Thanks again for your help
Hi gents, Can anyone tell me if i can use a 1968 and a 1969 Charger headlamp door vacuum actuators together?
Reason I ask is I have 2x 69 and 2x 68 Vacuum actuators but one of each is not working and I understand the 1968 ones have a magnet in them to hold them open..
Just wondering if this will...