Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
There has been some progress but since work picked up things aren't going as fast as usual on the car...
I ordered a driveshaft and have it here to install...
In case anyone's curious it ended up 32 3/4" long...
I sent the car out and had it lettered...
Finally decided on a name for it too...
I put the trim on my package try and installed them both at the same time...70 Satellite...
As for the 65 the back glass is first and then the package tray...
I don't know how anyone with out the tools...time and talent to finish one themselves could afford to pay someone else to do everything...
Mine strap me financially during a build and I do 90% of everything...
Being upside down going in the door because you overpaid for junk doesn't help...
My project cars have an 80% finishing rate as of now...
70 Satellite took 3 years from 2007-2010 and have been driving it ever since...
69 Dart took 3 1/2 years from 2010 to 2014 and have been driving it ever since...
72 Duster took 2 1/2 years from 2016 to late 2018 and have been driving it...
My project went gangbusters for about 3 months with most everything falling into place...
Lately it has been 1 step forward and 3 steps back...
Only good thing about is I do still make forward progress here and there...
Top picture is December 17th of 2023...
Bottom picture is February 23rd...
I researched those two kits...then I may also need to add in the extra 4160 metering block and bowl gaskets...
Definitely a little higher than I would have guessed...
The carbs I have seem to work really well so far but are leaking at a few different areas...
I'd just as soon rebuild them with new kits but in researching it I'm not sure what I need to purchase...
These carbs have the metering blocks installed in the secondary's and the longer fuel feed...
I got the new alternator belt installed after the first one I bought was too short...
Finished up 90% of the wiring...
The other 10% is the line lock and the field wire for the alternator which I can do later...
Headlights...tail lights...dome lights and gauge light wiring all works now...
Mine is very primitive in comparison to some of yours...
It has worked well on A-B and E bodies on numerous occasions...
I have only ever added to its height for a deeper oil pan...
Thx...Its been too long and I just want it done...
Not much has happened here lately...
The guy who painted my car got his hand hurt...
I've been spending time helping assemble his car...
Deal was to have them both done by Memorial Day weekend so neither should be a problem...
I finished...
Not a big deal but I also managed to get the right hand kick panel installed...
I'm re-routing the tach cable when I finish the throttle pedal bracket...
This left me an open grommet to run the temp gauge through once the dash is installed...
Left hand side kick panel will go in once some...
I picked up a new radiator as the other one I liked so much tested more like a fountain...
Got it installed along with the radiator hoses...
The fuel lines from the chassis bar to the carbs are also installed along with the fuel filters...
Thx...
I got the headers back and got them installed...
I like the finish...
It's Eastwood High Temp Matte Silver...
Found 3/8" fine thread nuts with a huge shoulder on the back and 5/8" head to fasten them on with...
Once the headers were on the front chassis bars and shocks were...
Had a decent day of weather here...
Pushed the car out in the sun to clean-up a little inside...
Hooked up everything for the clutch pivot and the clutch rod...
Yea it was cold and snowing all day here...didn't get anything out of it though...
Not a lot of work occurred today...
Transmission is installed...
Trans crossmember and mount are installed...
The bar to secure the motor from ever moving forward or back is installed...