Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Thanks Bob, yes, I'll likely be rebuilding the original carb after I get this car on the road & registered. It'll be a driver for my wife. since I'm a bit out of my comfort zone with carbs, i figured the straight line to getting this on the road was a new carb..
Thanks for the suggestion &...
64 dodge polara, 383
I'm replacing this carter afb with edelbrock 1405 carb. Whats this device on the pass side of carter carb? (Red arrow)
It seems that the new carb covers this actuator. I haven't determined if the edelbrock needs this. Thanks
Thanks for all the input, I really appreciate all.
I originally, before I posted this question, set torque
Wrench to 100 ft lb. And stripped the bolt threads. (wheel not loaded) Couldn't find a torque spec, so pulled stripped bolts out and installed the original bolts to 35 ft lb to be safe...
Just pulled engine & trans, I noticed tunnel mods that look like they were performed with cutting torch. Could this have been done in Hamtramck? Or is it post assembly mod?
Images taken from below shifter access hole.
Thanks.
Dan