Search results for query: *

I just finished getting my transmission rebuilt over the last few weeks. I also, changed out my exhaust manifolds with Summit Racing Ceramic headers. The transmission is a 727 attached to my 440 motor in my 68 Coronet 440. My problem is that the tube is not clearing around the headers and or...

I have a 68 Coronet with a 440 motor and electronic ignition. I am looking to add the non-Rallye tachometer into the location in the dash. Any recommendations on where I can get one that supports and updated distributor and ignition system? Also, I have one that doesn't work and I could send...

I was hoping someone may have a good reference for a transmission repair shop in the Seattle / Tacoma area. Not something I want to tackle nor do I have the appropriate tools etc. to perform this work. Any feedback would be appreciated. I don't know the exact 727 year or anything as I have not...

I have a 440 motor with a 727 behind it. Car is a 68 Coronet with 318 originally. There is no kickdown linkage on the motor today. The car drives and runs great, but the issue I am seeing is when I am in Drive the car will shift from 1st to 2nd gear pretty much immediately unless I manually...

I am looking for the inspection cover for a 727 Torqueflite Transmission anyone have one they are willing to sell? There are some on eBay, but thought I would look to FBBO first. You can see picture below...

I have a 68 Coronet with a 440 in it and have the standard exhaust manifold gaskets installed, I was wondering are there some better gaskets, as I have thought about doubling them up just to ensure I am getting a good seal and they are not leaking? It seems they are pretty thin and my not create...

My 1968 Dodge Coronet 440 purchased in March of 2013 and been working on the restoration since. Custom paint, stripes etc. replaced right rear quarter panel, trunk pan and lower left rear quarter panel. Put new vinyl top on and then used 1970 Sublime Green for the paint. It definitely stands out.

Anyone know where I can buy one? I have looked at several places and none of them have a rear windows seal for a 1968 B-B Body Dodge. Is there not a seal, do you just use sealant or something? Any feedback would be great.

I have 68 Dodge Coronet with 440 and HEI etc. I do not have the power that I think the car should and after looking at carburetor, wires, plugs etc. I began checking the charging and at idle I am barely making 12 volts and when it revs it does not change much. The alternator is new and I have...

I have a 1976 440 motor in my 68 Coronet and seems like it is pretty stock with the exception of Edelbrock Carburetor and Edelbrock Performer intake. I am wondering what cam would get be the best performance with the current compression etc. that is in this stock 440, that seems pretty...

I was wondering if anyone knows or has correctly mounted their throttle cable with a Performer 2 Intake with a 1" spacer under the Edelbrock carb? I am having a problem in that the cable is barely reaching the throttle cable bracket and thinking that due to the 1" spacer is causing me grief...

Does anyone know where you can buy the pins for the instrument cluster circuit board, during disassembly one of the pins pulled off the circuit board with the harness? Any feedback would be greatly appreciated.

Does anyone know if the following wiring harness from Classic Industries will work with Postage Stamp Tachometer. I do not have the Rallye Gauges so, just want to know if this will work? Or if someone has a harness for this type of setup I would be interested in purchasing.. Any help or...

Looking for a drivers side kick panel for my 68 Coronet. I have the passenger side, but missing the drivers side. Anyone got one for sale?

I saw a couple threads talking about using the Helicoil tap and die inserts to fix this issue. The only question I had does anyone know what specific Helicoil kit I should buy, the whole kit is like $150, but each individual kit is ~$30, as I only have 1 bolt whole giving me this headache. I...