Search results for query: *

I have a 1966 Dodge Coronet that I have had for over 20 years and I just don't have the time right now to finish it. It has solid quarter panels and floors. It has been in the dry since I have owned it. I have a lot of extra parts that can go with the car or buy as little or as much as you want...

I am installing a set of super stock springs on my 66 Coronet and I think the shackles are going to far forward. Can you let me know what I need to do and at what angle the shackle should sit at?

I have a set of super stock leaf springs that I am trying to remove the old rubber bushings from to install new ones. What is the best way to remove the old ones? I don't really want to burn them out if I can keep from it. I have sprayed them with PB Blaster and hammered on them and they have...

I have a 66 Coronet that I am ordering a rebuild kit for the for front suspension and I don't know what shocks to run. It will be driven very little on the street due to having 4:88 gears. I plan on taking it to the strip every once in a while. It will be a 440 with dual carbs. Can you recommend...

I am getting ready to order a bunch of front suspension parts to rebuild my suspension on my 66 Coronet. It has been sitting without an engine in it for over 20 years. I plan on doing a non-power disk brake conversion, replacing upper and lower control arms, getting the Poly performance super...

I have an engine that I bought that had been rebuilt and never started. The assembly lube they used has dried so I am taking it apart to get all the lube cleaned up. What can I use to remove all the lube without hurting the bearing, rods or crank? Also do you think it will be a problem to reuse...

I have several engines and transmissions that I am not going to use for awhile and thought I would see if there was anyone that was interested in them. I will not ship these so you will need to be able to drive to me and pick them up. 77 440 without cam, I bought this engine like this and I...

I am testing the waters on a 18 spline 4 speed with a date code of 5-9-66. It is apart and will need put back together. It does not have a shifter or linkages and does not have a bell housing. If I don't sell it I will put it in my 66 Coronet but thought it might be worth more to someone with a...

I am looking for a pair of good rust free fenders for a 66 Dodge Coronet. Let me know if you have any. Thank you.

One 66 Dodge Coronet floor pan and two truck pans. They have had the spot welds drilled out. The floor pan has a little rust that will need repaired but they are not to bad. $200 each, must be picked up, I will not ship.

I have two 66 and one 67 complete quarter panels. One has a dent but can be repaired easily. No holes or major rust issues. Asking $500 each. Must be picked up, I will not ship. Located in Hurricane WV.

I don't know if I should post this here or in the engine section. I have a 66 Coronet that I am trying to put on the road on a tight budget and I have a 73 440 that I plan on putting in it. I would like to get some advice on the engine build and see if some of the parts I already have will work...