Search results for query: *

After media blasting our 8 3/4 diff we noticed it has a slightly bend tube on the right hand side. We began stripping it down . The left hand axel and backing plate went like clockwork. The righthand axel refuses to come out . ??? I assume the bend has caused the spline end of the axel to jam...

Hello, My friend wants to purchase hood scoops for his super bee clone. I am going to Carlisle this year and said I am happy to pack these scoops in my bag and bring back to NZ. The freight is astronomical. Question, do the part vendors bring these type of items to the show to sell ? Which...

Hi all, Been far too long . I still have my 70 RR but it has not been on the road for 9 months. Gear box needs a freshen up. Got a kit from Brewers , just haven't installed it. My mate Grant wanted a 1970 superbee and we looked and looked . Only found 2 here in NZ that came up for sale but not...

Finally got around to swiping 4 speeds in the RR. had to trim 10mm off input shaft as crank pilot hole not deep enough (must be an auto crank drilled after leaving factory). Put a pilot bearing in. Old 4 speed got an overhaul and it is going in my Cuda project as it had the correct shifter...

Hi all, I live in New Zealand. If I was interested in buying a car in USA and I had the number plate or Vin number is there a web site that you can use to check the cars history. 60's and 70's American cars. Thanks Tony

Took old 4 speed out and tried for hours to get replacement one in, was always 25mm ( 1") gap between housing and 4 speed casing. Finally took it out and used a ruler only to find the input shaft was 25mm longer on replacement one. Looks like the gearbox that came out has had its shaft...

I am about to buy steelie rims from Summit for my 70 RR. Will need to buy lugs nuts from them but which ones to buy is my question. Their suggested nuts are either Cal Custom (CAL-7540026) or Gorilla Nuts GOR-90087. Anyone using these ?, assume that I have to use Open ended style nuts ? Thanks...

my next project is to make my nephew a full size basketball frame. Want thoughts on the steel box tubing and design. using 4' x4' x .16' ( 100x100x4mm) main section is 13ft long, 10ft above ground and 3ft below concreted in. Weld a 3ft length at a 90 degree angle at the top and weld...

Is a 70 wheel ? How does the center cap attach to the wheel ? am I missing anything. The area in the red box has been bent , I assune this needs to be flattened. The lugs circled I assume slot into the holes circled ? Any help appreciated. Tony

I have got my RR badges the secure to the side of the rear quarters. 2 'road' and 2 'runner'. 3 of the 4 have dark paint on the top and bottom as you look down and up at them. The other 1 is all chrome. Question is have the 3 got over spray on them or has the paint worn off the 4th ? Thanks Tony

Is there a left and right boot lid arm. Just fitted the boot lid and it needs to move sideways. There does not seem to be an adjustment for this and i was wondering if I have the arms on the wrong sides. Only needs to move 5mm or so. Any thoughts welcomed Thanks Tony

What fills in this gap at the back of the parcel shelf and below the rear glass ? Photo be great Thanks, Tony

Have I got this setup correct ? Is this bracket/plate in the correct place.

My Carter carby is real dirty, what is the best way to get it clean and tidy ? Carby clean and small brush ? Thoughts please. Thanks, Tony

I do not know anything about 4 speeds but this thrust bearing does not look good. Should the sharp edge be sticking up on the inside of the bearing face ? Buy a new one ? where is the best place to buy from ?

I am missing 1 hood bow, think it is one of the short ones. Each has a different colored end. Can anyone tell me what the order of colors is. Will try and make a replacement or last resort buy a full set. Thanks Tony

New sail panel needs holes drilled so i can attach rear window trim clips. Old sail panel was thrown out before I got reference pics. Help please, measurements, diagrams, or photos ? Because I repaired the rear corners as well , i think I am missing a hole on the sides as well. Only have 2 holes...

These are pics of a 70 RR ( factory Hemi ). Pic 1- Do the fuel line pipes hug the body ? If not what distance are they from the body. I am making a new one up . Pic 2- How does the brake line route to get into the back of the bracket. Can't find this 2nd bracket, is it an exhaust mount...

How easy is it to remove the heater box in a 70 RR once the car is completly put back together. don't want to replace the heat core now but definitely at a later date.

i am about to paint the inside of my doors on my 70 RR. Color scheme is orange car and black interior. My question is where does the outside color end and the inside black start. From photos it looks like the door seal rubber is the line to use. Above the door card is black, below the door card...