Search results for query: *

its a 67 coronet r/t with a 67 440 and a later model A833 OD. 4:10 gears. the car is as smooth as can be until i start approaching 70. the vibration starts around 65 and goes away around 80. its a pretty fast frequency so it feels like drive shaft related. i changed both u-joints, there...

I finally reached 10000 miles on my coronet. It sat with 9968 for decades. I put the proper speedometer gear in the tranny and a new speedo cable and watched it turn to 10000. Now it won't go to 10001. I hear a click and the speedo needle jumps. It almost sounds like a gear stripping trying...

Bump steer-can it be this bad? i have a 67 coronet, sits just a bit lower than stock. if i set my toe properly (0-1/8 toe in) while sitting at ride height, the tires squeal while driving. it appears the rise in the front end while under power puts the tires toe in. what i have done to get...

I have a 67 440 in my Coronet. it now has a six pack which works pretty well. the motor is stock otherwise and i would like to keep it that way. it has an overdrive 4 speed and 4.10 gears. what cam may work well to add mid to top end power without adding headers and such. this would...

Some more items that came with the car that I can't figure out where they go... does anyone recognize these parts?

These came with the pile of parts for my 67 coronet. Does anyone know what they are or where they go?

I hope this doesn't seem like a stupid question but im finally trying to install the console in my 67 coronet. When I lay the console in place. I can line up the back holes and the middle holes in the console to the mounting brackets and that seems to line up pretty good. my question is on the...

on my 67 coronet, when i align the master spline on the steering wheel with the steering shaft, the wheel is out 180 degrees. I have not yet checked to see if the coupler was aligned properly with steering box, but would assume it is since i would image it would not go on easily without aligning...

There is plenty of info on the plastic turn signal cancel cams that seem to break pretty often. What I cannot seem to find is the cam itself that mounts under the steering wheel the actually hits the plastic cam to release it. It seems to be the same part number across almost all of the models...

does anyone know where I can get a replacement mirror glass for my 67 coronet. The metal part is in great condition, but the glass is pretty nasty. thanks

what is the proper setup for the clutch pedal. I have the Big spring installed under the dash on the pedal. when I push the clutch in it comes back up but not all the way. If I pull it up just a bit more the big spring pulls it up the rest of the way. it seems to me that if it doesn't pop up...

I am desperately in need of a drivers defrost vent so I can button up this dash. Any ideas where I can find one?

can anyone tell me how to change my Avatar? im sure im missing something obvious. thanks,