Search results for query: *

wondering if they are the same plz help I found a wheel tire combo I like but it’s on a 69 charger

sorry if this is not the right forum I can delete and repost. I have a complete rotating assembly forged 440 crank ly rods, pistons 457 head? With rockers and shafts. # 1 bearing spun and 2 is scored but all bearings were stamped std. what is the whole setup worth? I don't need because I put a...

Hey all I recently rebuilt my 440 6 pack and dropped a 512 striker aluminum heads and solid roller tuned it to what the cam said and after running it on a long drive it diesels when shutting off... is this a timing issue? Any help or direction is appreciated. Also I was told to adjust the timing...

Max Size Drag radial with 15x10 wheel on rear of 70 Coronet body with XHD Springs that has worked ... go

I'm sure this is somewhere but I can't find it. I need drag radials on my Bee after Rebuilding the motor that now puts 650ish and 720ish to rear wheels. Can anyone tell me what the max tire size with a drag radial and 15'' wheel and offset ( I want as deep a dish as possible) I can fit on stock...

I built a 440 with a 512 stroker kit aluminum heads. And a full 580 lift mechanichal roller cam build. My problem is now I can not get my 70 coronet superbee to hook up any suggestions are appreciated at 50+ mph half throttle is smoking tires any help is appreciated

Fresh 440 motor with solid roller ect. Got engine started and timed idle d and ran great. Warmed,it up took for test drive ran fine. Stopped at parts store and upon restart hard start once,started at idle RPM on tach bounced around and engine stalls. Driving it home was able to start with heavy...

Hello I recently rebuilt my 440 6 pack motor and have it back in the 70 Bee. I used a 512 stroker kit, aluminum heads, and the cam is a Comp Cam mechanical roller,Adv.Dur. 286 Int./292 Exh.;V.Lift .576 Int./.582 Exh.;Lobe 110 deg. My question is what springs would be recommended I use with this...

Hi all I recently spun the number 1 rod bearing on my 440 six pack motor.. After throwing up some....I am rebuilding it. Here is my build. 30 over block. 440 source ported heads and 512 stroker kit. And comp cams mechanical roller with .576/.582. Not sure the power I will get but my engine guy...

Hello all I spun a bearing in my 1970 440 six pack bee. Looking at rebuild with 440 source stealth heads... And the 512 stroked kit... Want to drive to car shows but want max performance. I have 391 years and beefed up trans with manual valve body and Hurst quarter stick.. Any suggestions for...

Are 70 Superbee factory steel wheels supposed to be painted body color? Mine are black with dog dish caps

Hello all I am having trouble getting the fuel mixture set on my 440 6pack center carb. I turn the fuel mixture needles in all the way and the motor doesnt cut out or bog. It still idle off the outboards. The meter block is new. Can I negate the outboards to get the center dials in. Or what is...

Looking to switch to a roller setup and wondering what a good ...leave someone sitting there wondering wtf just happened roller cam with a 6 pack setup you recommend

If I change my mopar electronic ignition orange box set up on my 440 6 pack engine to the msd setup will I see a difference? Ie is it worth the cost

hello i been trying to adjust the mixture screws on my six pack on the center carb...the out boards are vacuum. i turn both screws all the way in and the motor doesn't stall? what am i missing here? any help on this would be great. ty in advance lol

my 70 bee My 3 YO calls Him BUZZ is a factory stripe delete car with a DY3 paint code yellow gold tag....wondering how many stripe deletes were ordered in 1970

hello im having problems with my door handles. they seemed to work fine and then all of a sudden i push the button in and nothing. every once in awhile ill hear a click but nothing. then randomly it will work fine for a few times then wham nothing. maby a lubrication problem or possibly somthing...

heyo people i owned a fctory original 1971 superbee in the 90s and sold it when we moved for family reasons....just purchased a 1970 superbee factrory cream color with stripe delete and a 440 six pack....cant wait till it is delivered ...anyone know where i can find a list of factory options for...