Search results for query: *

I was too hard on my Magnum 5.9 that I had in my 65 Coronet and I want to build another one with my good parts so really only need a good block. I am in Southern California. If you know a possible source for same, please let me know. Thanks Guys

I have installed a B and M Ratchet shifter in my 360 magnum 727 trans 65 Coronet. The problem is that the only path for the shifter cable from the bracket on the transmission puts it right up against the exhaust header where the cable goes across the bell housing. I already ruined the first...

I am putting a fresh1971 torqueflite 727 into my 65 Coronet and it requires a different rear mount setup. My rear mount cross-member piece also retains the parking brake cable assy. One, does anyone know how to remove that cable assy without damaging it? two. is there any bolt in replacement to...

I am installing a freshly built 727 from a 71 dodge in my 65 dodge behind a 2002, 360 roller motor and have hit a snag. The studs at the rear mount on the 727 are about 1 and 1/2 inches farther to the rear and 1" closer together, than were the bolt holes on the A904 that I am replacing. Is...

I am putting a 727 transmission from a 71 Dodge into my 65 Coronet 440. It has a larger speedometer adapter plug and gear assembly than the A904 that I took out. Does anyone know where I can get the speedometer cable assembly or perhaps have one for sale?

Has anyone else had this same issue and how was it resolved? Tail lamp works, no juice coming to the brake / turn element. Front left working as normal and dash indicator for left turn is flashing as normal. just looking for a "most likely" answer......

I messed up one oil control rings on the Magnum 360 I am building. I don't want to buy a whole set of rings. I just need one of the steel oil control rings, not the expander. Bore is standard, not oversize. Thanks in advance for any help you can give, even if it is just a source.

Hi, I'm hoping someone can help me with this.... I have a 65 Coronet with an A904 transmission column shift. I'm replacing the park lock cable but also need the bracket that attaches this cable to the steering column assembly in the engine compartment. I have a picture of the broken piece...

I need to replace the Park Lock cable on my 65 coronet 4 door with A904 transmission, and it looks to me like Imperial Services out of Michigan is the best source. Am I on the right track? Also, the detents are broken on both of my front doors. Where can the best value replacement parts be...

I am building a Magnum 360 to put in my 65 Dodge Coronet 440. I am being told that the oil pan is different on the Magnum block than it was on the LA block. Does anyone know HOW it was/is different? I need a center sump to fit the K frame/steering link configuration on the Coronet. I have...

Greetings from San Diego, I used to (15 years ago) drag race a 67 Belvedere in Byron Illinois. It was a low 11's car but I had to sell it when I moved to California. Now I am 66 and just got a 65 Coronet project car. See below In this photo the car was on jack stands so I could inspect...